Re: [PATCH v6 0/3] PCI: IPQ6018 platform support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 12, 2022 at 05:12:59PM +0100, Lorenzo Pieralisi wrote:
> On Mon, Feb 07, 2022 at 04:51:23PM +0200, Baruch Siach wrote:
> > This series adds support for the single PCIe lane on IPQ6018 SoCs. The code is 
> > ported from downstream Codeaurora v5.4 kernel. The main difference from 
> > downstream code is the split of PCIe registers configuration from .init to 
> > .post_init, since it requires phy_power_on().
> > 
> > Tested on IPQ6010 based hardware.
> > 
> > Changes in v6:
> > 
> >   * Drop DT patch applied to the qcom tree
> > 
> >   * Normalize driver changes subject line
> > 
> >   * Add a preparatory patch to rename PCIE_CAP_LINK1_VAL to PCIE_CAP_SLOT_VAL,
> >     and define it using PCI_EXP_SLTCAP_* macros
> > 
> >   * Drop a vague comment about ASPM configuration
> > 
> >   * Add a comment about the source of delay periods
> > 
> > Changes in v5:
> > 
> >   * Remove comments from qcom_pcie_init_2_9_0() (Bjorn Andersson)
> > 
> > Changes in v4:
> > 
> >   * Drop applied DT bits
> > 
> >   * Add max-link-speed that was missing from the applied v2 patch
> > 
> >   * Rebase the driver on v5.16-rc3
> > 
> > Changes in v3:
> > 
> >   * Drop applied patches
> > 
> >   * Rely on generic code for speed setup
> > 
> >   * Drop unused macros
> > 
> >   * Formatting fixes
> > 
> > Changes in v2:
> > 
> >   * Add patch moving GEN3_RELATED macros to a common header
> > 
> >   * Drop ATU configuration from pcie-qcom
> > 
> >   * Remove local definition of common registers
> > 
> >   * Use bulk clk and reset APIs
> > 
> >   * Remove msi-parent from device-tree
> > 
> > Baruch Siach (2):
> >   PCI: dwc: tegra: move GEN3_RELATED DBI register to common header
> >   PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
> > 
> > Selvam Sathappan Periakaruppan (1):
> >   PCI: qcom: Add IPQ60xx support
> > 
> >  drivers/pci/controller/dwc/pcie-designware.h |   7 +
> >  drivers/pci/controller/dwc/pcie-qcom.c       | 155 ++++++++++++++++++-
> >  drivers/pci/controller/dwc/pcie-tegra194.c   |   6 -
> >  3 files changed, 160 insertions(+), 8 deletions(-)
> 
> Hi Bjorn, Andy,
> 
> any feedback on this series please ?

Any feedback on these patches please ?

Thanks,
Lorenzo



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux