21.02.2022 15:01, Jon Hunter пишет:
> Hi Dmitry,
>
> On 18/06/2021 22:54, Dmitry Osipenko wrote:
>> Use hwmon_notify_event() to notify userspace and thermal core about
>> temperature changes.
>>
>> Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>> ---
>> drivers/hwmon/lm90.c | 44 +++++++++++++++++++++++++++++++++-----------
>> 1 file changed, 33 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
>> index 2e057fad05b4..e7b678a40b39 100644
>> --- a/drivers/hwmon/lm90.c
>> +++ b/drivers/hwmon/lm90.c
>> @@ -465,6 +465,7 @@ enum lm90_temp11_reg_index {
>> struct lm90_data {
>> struct i2c_client *client;
>> + struct device *hwmon_dev;
>> u32 channel_config[4];
>> struct hwmon_channel_info temp_info;
>> const struct hwmon_channel_info *info[3];
>> @@ -1731,22 +1732,41 @@ static bool lm90_is_tripped(struct i2c_client
>> *client, u16 *status)
>> if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH |
>> LM90_STATUS_LTHRM)) ||
>> (st2 & MAX6696_STATUS2_LOT2))
>> - dev_warn(&client->dev,
>> - "temp%d out of range, please check!\n", 1);
>> + dev_dbg(&client->dev,
>> + "temp%d out of range, please check!\n", 1);
>> if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH |
>> LM90_STATUS_RTHRM)) ||
>> (st2 & MAX6696_STATUS2_ROT2))
>> - dev_warn(&client->dev,
>> - "temp%d out of range, please check!\n", 2);
>> + dev_dbg(&client->dev,
>> + "temp%d out of range, please check!\n", 2);
>> if (st & LM90_STATUS_ROPEN)
>> - dev_warn(&client->dev,
>> - "temp%d diode open, please check!\n", 2);
>> + dev_dbg(&client->dev,
>> + "temp%d diode open, please check!\n", 2);
>> if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
>> MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
>> - dev_warn(&client->dev,
>> - "temp%d out of range, please check!\n", 3);
>> + dev_dbg(&client->dev,
>> + "temp%d out of range, please check!\n", 3);
>> if (st2 & MAX6696_STATUS2_R2OPEN)
>> - dev_warn(&client->dev,
>> - "temp%d diode open, please check!\n", 3);
>> + dev_dbg(&client->dev,
>> + "temp%d diode open, please check!\n", 3);
>> +
>> + if (st & LM90_STATUS_LLOW)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_min, 0);
>> + if (st & LM90_STATUS_RLOW)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_min, 1);
>> + if (st2 & MAX6696_STATUS2_R2LOW)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_min, 2);
>> + if (st & LM90_STATUS_LHIGH)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_max, 0);
>> + if (st & LM90_STATUS_RHIGH)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_max, 1);
>> + if (st2 & MAX6696_STATUS2_R2HIGH)
>> + hwmon_notify_event(data->hwmon_dev, hwmon_temp,
>> + hwmon_temp_max, 2);
>
>
> We observed a random null pointer deference crash somewhere in the
> thermal core (crash log below is not very helpful) when calling
> mutex_lock(). It looks like we get an interrupt when this crash
> happens.
>
> Looking at the lm90 driver, per the above, I now see we are calling
> hwmon_notify_event() from the lm90 interrupt handler. Looking at
> hwmon_notify_event() I see that ...
>
> hwmon_notify_event()
> --> hwmon_thermal_notify()
> --> thermal_zone_device_update()
> --> update_temperature()
> --> mutex_lock()
>
> So although I don't completely understand the crash, it does seem
> that we should not be calling hwmon_notify_event() from the
> interrupt handler.
>
> BTW I have not reproduced this myself yet, so I have just been
> reviewing the code to try and understand this.
Matt Merhar was experiencing a similar issue on T30 Ouya, but I never
managed to reproduce it on Nexus 7 and Acer A500 tablets, and couldn't
spot any problem in the code. IIRC, it was a NULL dereference of another
pointer within that code.
We tried to add couple debug printks and the problem disappears when you
try to look at it, which is very suspicious.
>
> [ 7465.595066] Unable to handle kernel NULL pointer dereference at
> virtual address 00000000000003cd
> [ 7465.596619] Mem abort info:
> [ 7465.597854] ESR = 0x96000021
> [ 7465.599097] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 7465.600338] SET = 0, FnV = 0
> [ 7465.601526] EA = 0, S1PTW = 0
> [ 7465.602705] FSC = 0x21: alignment fault
> [ 7465.603885] Data abort info:
> [ 7465.605017] ISV = 0, ISS = 0x00000021
> [ 7465.606171] CM = 0, WnR = 0
> [ 7465.607301] user pgtable: 64k pages, 48-bit VAs, pgdp=00000001041f1800
> [ 7465.608490] [00000000000003cd] pgd=0000000000000000,
> p4d=0000000000000000, pud=0000000000000000
> [ 7465.609814] Internal error: Oops: 96000021 [#1] PREEMPT SMP
> [ 7465.610991] Modules linked in: bridge stp llc snd_soc_tegra210_admaif
> snd_soc_tegra_pcm snd_soc_tegra210_mixer snd_soc_tegra210_mvc
> snd_soc_tegra210_i2s snd_soc_tegra210_dmic sn
> d_soc_tegra210_adx snd_soc_tegra210_sfc snd_soc_tegra210_amx
> snd_soc_tegra210_ahub tegra210_adma snd_soc_rt5659 snd_soc_rl6231
> pwm_tegra tegra_aconnect snd_hda_codec_hdmi rfkill snd_hda_tegra
> snd_hda_codec at24 phy_tegra194_p2u snd_hda_core lm90
> snd_soc_tegra_audio_graph_card tegra_bpmp_thermal
> snd_soc_audio_graph_card snd_soc_simple_card_utils pwm_fan crct10dif_ce
> pcie_tegra194 cec drm_kms_helper drm ip_tables x_tables ipv6
> [ 7465.632232] CPU: 2 PID: 433 Comm: irq/140-lm90 Tainted: G
> O 5.16.0-tegra-g9d109504d83a #1
> [ 7465.636285] Hardware name: Unknown NVIDIA Jetson AGX Xavier Developer
> Kit/NVIDIA Jetson AGX Xavier Developer Kit, BIOS v1.1.2-901d3c52 02/07/2022
> [ 7465.650457] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 7465.656210] pc : mutex_lock+0x18/0x60
> [ 7465.660134] lr : thermal_zone_device_update+0x40/0x2e0
> [ 7465.665117] sp : ffff800014c4fc60
> [ 7465.668781] x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27:
> ffffdde218426790
> [ 7465.675882] x26: ffff365ee3f6e000 x25: 0000000000000000 x24:
> ffff365ee3f6e000
> [ 7465.683485] x23: ffffdde218426870 x22: ffff365ee3f6e000 x21:
> 00000000000003cd
> [ 7465.690816] x20: ffff365ee8bf3308 x19: ffffffffffffffed x18:
> 0000000000000000
> [ 7465.697982] x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15:
> 0000000000000040
> [ 7465.705320] x14: ffffdde21a4889a0 x13: 0000000000000228 x12:
> 0000000000000000
> [ 7465.712493] x11: 0000000000000000 x10: 0000000000000000 x9 :
> 0000000000000000
> [ 7465.719580] x8 : 0000000001120000 x7 : 0000000000000001 x6 :
> 0000000000000000
> [ 7465.727099] x5 : 0068000878e20f07 x4 : 0000000000000000 x3 :
> 00000000000003cd
> [ 7465.734348] x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 :
> 00000000000003cd
> [ 7465.741347] Call trace:
> [ 7465.744207] mutex_lock+0x18/0x60
> [ 7465.747427] hwmon_notify_event+0xfc/0x110
> [ 7465.751358] 0xffffdde1cb7a0a90
> [ 7465.754574] 0xffffdde1cb7a0b7c
> [ 7465.757705] irq_thread_fn+0x2c/0xa0
> [ 7465.760937] irq_thread+0x134/0x240
> [ 7465.764850] kthread+0x178/0x190
> [ 7465.768083] ret_from_fork+0x10/0x20
> [ 7465.771748] Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02)
> [ 7465.777865] ---[ end trace f0b3723991411538 ]---
>
