Re: [PATCH v3 2/4] hwmon: (lm90) Use hwmon_notify_event()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry,

On 18/06/2021 22:54, Dmitry Osipenko wrote:
Use hwmon_notify_event() to notify userspace and thermal core about
temperature changes.

Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
  drivers/hwmon/lm90.c | 44 +++++++++++++++++++++++++++++++++-----------
  1 file changed, 33 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 2e057fad05b4..e7b678a40b39 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -465,6 +465,7 @@ enum lm90_temp11_reg_index {
struct lm90_data {
  	struct i2c_client *client;
+	struct device *hwmon_dev;
  	u32 channel_config[4];
  	struct hwmon_channel_info temp_info;
  	const struct hwmon_channel_info *info[3];
@@ -1731,22 +1732,41 @@ static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
  	    (st2 & MAX6696_STATUS2_LOT2))
-		dev_warn(&client->dev,
-			 "temp%d out of range, please check!\n", 1);
+		dev_dbg(&client->dev,
+			"temp%d out of range, please check!\n", 1);
  	if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
  	    (st2 & MAX6696_STATUS2_ROT2))
-		dev_warn(&client->dev,
-			 "temp%d out of range, please check!\n", 2);
+		dev_dbg(&client->dev,
+			"temp%d out of range, please check!\n", 2);
  	if (st & LM90_STATUS_ROPEN)
-		dev_warn(&client->dev,
-			 "temp%d diode open, please check!\n", 2);
+		dev_dbg(&client->dev,
+			"temp%d diode open, please check!\n", 2);
  	if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
  		   MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
-		dev_warn(&client->dev,
-			 "temp%d out of range, please check!\n", 3);
+		dev_dbg(&client->dev,
+			"temp%d out of range, please check!\n", 3);
  	if (st2 & MAX6696_STATUS2_R2OPEN)
-		dev_warn(&client->dev,
-			 "temp%d diode open, please check!\n", 3);
+		dev_dbg(&client->dev,
+			"temp%d diode open, please check!\n", 3);
+
+	if (st & LM90_STATUS_LLOW)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_min, 0);
+	if (st & LM90_STATUS_RLOW)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_min, 1);
+	if (st2 & MAX6696_STATUS2_R2LOW)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_min, 2);
+	if (st & LM90_STATUS_LHIGH)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_max, 0);
+	if (st & LM90_STATUS_RHIGH)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_max, 1);
+	if (st2 & MAX6696_STATUS2_R2HIGH)
+		hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+				   hwmon_temp_max, 2);


We observed a random null pointer deference crash somewhere in the
thermal core (crash log below is not very helpful) when calling
mutex_lock(). It looks like we get an interrupt when this crash
happens.

Looking at the lm90 driver, per the above, I now see we are calling
hwmon_notify_event() from the lm90 interrupt handler. Looking at
hwmon_notify_event() I see that ...

hwmon_notify_event()
  --> hwmon_thermal_notify()
    --> thermal_zone_device_update()
      --> update_temperature()
        --> mutex_lock()

So although I don't completely understand the crash, it does seem
that we should not be calling hwmon_notify_event() from the
interrupt handler.

BTW I have not reproduced this myself yet, so I have just been
reviewing the code to try and understand this.

Jon

[ 7465.595066] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd
[ 7465.596619] Mem abort info:
[ 7465.597854]   ESR = 0x96000021
[ 7465.599097]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 7465.600338]   SET = 0, FnV = 0
[ 7465.601526]   EA = 0, S1PTW = 0
[ 7465.602705]   FSC = 0x21: alignment fault
[ 7465.603885] Data abort info:
[ 7465.605017]   ISV = 0, ISS = 0x00000021
[ 7465.606171]   CM = 0, WnR = 0
[ 7465.607301] user pgtable: 64k pages, 48-bit VAs, pgdp=00000001041f1800
[ 7465.608490] [00000000000003cd] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 7465.609814] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 7465.610991] Modules linked in: bridge stp llc snd_soc_tegra210_admaif snd_soc_tegra_pcm snd_soc_tegra210_mixer snd_soc_tegra210_mvc snd_soc_tegra210_i2s snd_soc_tegra210_dmic sn
d_soc_tegra210_adx snd_soc_tegra210_sfc snd_soc_tegra210_amx snd_soc_tegra210_ahub tegra210_adma snd_soc_rt5659 snd_soc_rl6231 pwm_tegra tegra_aconnect snd_hda_codec_hdmi rfkill snd_hda_tegra snd_hda_codec at24 phy_tegra194_p2u snd_hda_core lm90 snd_soc_tegra_audio_graph_card tegra_bpmp_thermal snd_soc_audio_graph_card snd_soc_simple_card_utils pwm_fan crct10dif_ce pcie_tegra194 cec drm_kms_helper drm ip_tables x_tables ipv6
[ 7465.632232] CPU: 2 PID: 433 Comm: irq/140-lm90 Tainted: G           O      5.16.0-tegra-g9d109504d83a #1
[ 7465.636285] Hardware name: Unknown NVIDIA Jetson AGX Xavier Developer Kit/NVIDIA Jetson AGX Xavier Developer Kit, BIOS v1.1.2-901d3c52 02/07/2022
[ 7465.650457] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 7465.656210] pc : mutex_lock+0x18/0x60
[ 7465.660134] lr : thermal_zone_device_update+0x40/0x2e0
[ 7465.665117] sp : ffff800014c4fc60
[ 7465.668781] x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790
[ 7465.675882] x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000
[ 7465.683485] x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd
[ 7465.690816] x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000
[ 7465.697982] x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040
[ 7465.705320] x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000
[ 7465.712493] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 7465.719580] x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000
[ 7465.727099] x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd
[ 7465.734348] x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd
[ 7465.741347] Call trace:
[ 7465.744207]  mutex_lock+0x18/0x60
[ 7465.747427]  hwmon_notify_event+0xfc/0x110
[ 7465.751358]  0xffffdde1cb7a0a90
[ 7465.754574]  0xffffdde1cb7a0b7c
[ 7465.757705]  irq_thread_fn+0x2c/0xa0
[ 7465.760937]  irq_thread+0x134/0x240
[ 7465.764850]  kthread+0x178/0x190
[ 7465.768083]  ret_from_fork+0x10/0x20
[ 7465.771748] Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02)
[ 7465.777865] ---[ end trace f0b3723991411538 ]---




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux