15.12.2021 16:14, Thierry Reding пишет: > On Sun, Dec 12, 2021 at 12:13:59AM +0300, Dmitry Osipenko wrote: >> From: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx> >> >> If an USB port is an OTG port, then we should add the usb-role-switch >> property. Otherwise XUSB setup fails and therefore padctl is unable to >> set up the ports. This leads to broken USB and PCIe ports. Add the >> usb-role-switch properties to Tegra124 device-trees to fix the problem. >> >> The error message shown without this patch is e.g: >> usb2-0: usb-role-switch not found for otg mode >> >> [digetx@xxxxxxxxx: improved commit message] >> Tested-by: Thomas Graichen <thomas.graichen@xxxxxxxxx> # T124 Nyan Big >> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx> >> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> >> --- >> arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 1 + >> arch/arm/boot/dts/tegra124-apalis.dtsi | 1 + >> arch/arm/boot/dts/tegra124-nyan.dtsi | 1 + >> arch/arm/boot/dts/tegra124-venice2.dts | 2 +- >> 4 files changed, 4 insertions(+), 1 deletion(-) > > The device tree bindings for the XUSB pad controller say that when this > property is set, then the "connector" subnode should also exist. > > Any chance we can add that? I was planning on making that a dependency > in the json-schema conversion of the binding, in which case it would be > more of a "must" than a "should". I guess it will be harmless if you'll add the connector subnodes. Will you be able to create a separate patch that will add the subnodes on top of this patch? Thomas Graichen says that one USB port on Nyan Big doesn't work without this patch. This is why this patch is needed essentially.
