From: Thierry Reding <treding@xxxxxxxxxx>
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename all such nodes to allow validation to pass.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 4 ++--
arch/arm/boot/dts/tegra124-apalis.dtsi | 4 ++--
arch/arm/boot/dts/tegra20-colibri.dtsi | 6 +++---
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
8 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 28c29b6813a7..3209554ec7e6 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -246,7 +246,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ pex-perst-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index f3afde410615..814257c79bf1 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -248,7 +248,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ pex-perst-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index cde9ae8fa04b..4ba4d5229fcf 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -2055,7 +2055,7 @@ gpu-shutdown-trip {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan-reset-n {
+ lan-reset-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2063,7 +2063,7 @@ lan-reset-n {
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset-moci-ctrl {
+ reset-moci-ctrl-hog {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index a46d9ba9bb7a..3760744cc1b0 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -2047,7 +2047,7 @@ gpu-shutdown-trip {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan-reset-n {
+ lan-reset-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2055,7 +2055,7 @@ lan-reset-n {
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset-moci-ctrl {
+ reset-moci-ctrl-hog {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 585a5b441cf6..80e439003a6d 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -747,7 +747,7 @@ &emc_icc_dvfs_opp_table {
};
&gpio {
- lan-reset-n {
+ lan-reset-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
output-high;
@@ -755,7 +755,7 @@ lan-reset-n {
};
/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
- npwe {
+ npwe-hog {
gpio-hog;
gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
output-high;
@@ -763,7 +763,7 @@ npwe {
};
/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
- rdnwr {
+ rdnwr-hog {
gpio-hog;
gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 9f653ef41da4..93b83b3c5655 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -239,7 +239,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ pex-perst-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 86e138e8c7f0..fbfa75e53f32 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -257,7 +257,7 @@ reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ pex-perst-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 88b7f2925e9e..03b930bce479 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1041,7 +1041,7 @@ sound {
};
&gpio {
- lan-reset-n {
+ lan-reset-n-hog {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
output-high;
--
2.34.1
