Tegra AHCI dt-binding doc is converted from text based to yaml based. dtbs_check valdiation strictly follows reset-names order specified in yaml dt-binding. Tegra124 thru Tegra210 has 3 resets sata, sata-oob and sata-cold. Tegra186 has 2 resets sata and sata-cold. This patch changes order of SATA resets to maintain proper resets order for commonly available resets across Tegra124 thru Tegra186 for dtbs_check to pass. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- arch/arm/boot/dts/tegra124.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index d7001b2..e61e68a 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -650,9 +650,9 @@ <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; - reset-names = "sata", "sata-oob", "sata-cold"; + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; status = "disabled"; }; -- 2.7.4
