This series adds support for AHCI-compliant SATA to Tegra186 SoC. This series includes patches for - Converting text based dt-binding document to YAML. - Adding dt-bindings for Tegra186. - Enabling AHCI-compliance SATA for Jetson TX2. - Adding Tegra186 support to Tegra AHCI driver. Delta between patch versions: [v3]: fixed yaml example to pass dt_binding_check [v2]: v1 feedback related to yaml dt-binding. Removed conditional reset order in yaml and updated dts files to maintain same order for commonly available resets across Tegra124 thru Tegra186. Sowjanya Komatineni (6): arm: tegra: Change order of SATA resets for Tegra124 arm64: tegra: Change order of SATA resets for Tegra132 and Tegra210 dt-bindings: ata: tegra: Convert binding documentation to YAML dt-binding: ata: tegra: Add dt-binding documentation for Tegra186 arm64: tegra: Enable AHCI on Jetson TX2 ata: ahci_tegra: Add AHCI support for Tegra186 .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 176 +++++++++++++++++++++ .../bindings/ata/nvidia,tegra124-ahci.txt | 44 ------ arch/arm/boot/dts/tegra124.dtsi | 6 +- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 6 +- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 + arch/arm64/boot/dts/nvidia/tegra186.dtsi | 28 ++++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 +- drivers/ata/ahci_tegra.c | 60 +++++-- 8 files changed, 264 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml delete mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt -- 2.7.4
