Add YAML schema for Tegra audio graph sound card DT bindings. It uses the same DT bindings provided by generic audio graph driver. Along with this few standard clock DT bindings are added which are specifically required for Tegra audio. Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx> --- .../sound/nvidia,tegra-audio-graph-card.yaml | 158 +++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml new file mode 100644 index 0000000..284d185 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph based Tegra sound card driver + +description: | + This is based on generic audio graph card driver along with additional + customizations for Tegra platforms. It uses the same bindings with + additional standard clock DT bindings required for Tegra. + + See{LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.yaml + +maintainers: + - Jon Hunter <jonathanh@xxxxxxxxxx> + - Sameer Pujar <spujar@xxxxxxxxxx> + +properties: + compatible: + items: + - enum: + - nvidia,tegra210-audio-graph-card + - nvidia,tegra186-audio-graph-card + + dais: + $ref: /schemas/sound/audio-graph-card.yaml#/properties/dais + + label: + $ref: /schemas/sound/simple-card.yaml#/properties/label + + pa-gpios: + $ref: /schemas/sound/audio-graph-card.yaml#/properties/pa-gpios + + widgets: + $ref: /schemas/sound/simple-card.yaml#/definitions/widgets + + routing: + $ref: /schemas/sound/simple-card.yaml#/definitions/routing + + mclk-fs: + $ref: /schemas/sound/simple-card.yaml#/definitions/mclk-fs + + prefix: + $ref: /schemas/sound/simple-card.yaml#/definitions/prefix + + clocks: + minItems: 2 + + clock-names: + minItems: 2 + items: + - const: pll_a + - const: plla_out0 + + assigned-clocks: + minItems: 1 + maxItems: 3 + + assigned-clock-parents: + minItems: 1 + maxItems: 3 + + assigned-clock-rates: + minItems: 1 + maxItems: 3 + + ports: + $ref: /schemas/sound/audio-graph-card.yaml#/properties/ports + +patternProperties: + "^port(@[0-9a-f]+)?$": + $ref: /schemas/sound/audio-graph-card.yaml#/definitions/port + +additionalProperties: false + +required: + - compatible + - dais + - clocks + - clock-names + - assigned-clocks + - assigned-clock-parents + +examples: + - | + #include<dt-bindings/clock/tegra210-car.h> + + tegra_sound { + compatible = "nvidia,tegra210-audio-graph-card"; + + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; + + dais = /* FE */ + <&admaif1_port>, + /* Router */ + <&xbar_i2s1_port>, + /* I/O DAP Ports */ + <&i2s1_port>; + + label = "jetson-tx1-ape"; + }; + + tegra_ahub: ahub@702d0800 { + // ... + + reg = <0x702d0800 0x800>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + xbar_i2s1_port: port@a { + reg = <0xa>; + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + }; + }; + + tegra_i2s1: i2s@702d1000 { + // ... + + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x702d1000 0x100>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + + // ... + }; + }; + }; + +... -- 2.7.4
