23.04.2020 13:56, Jon Hunter пишет: > > On 22/04/2020 15:07, Dmitry Osipenko wrote: > > ... > >>> So I think that part of the problem already existed prior to these >>> patches. Without your patches I see ... >>> >>> [ 59.543528] tegra-i2c 7000d000.i2c: i2c transfer timed out >> >> Does this I2C timeout happen with my patches? Could you please post full >> logs of an older and the recent kernel versions? > > I believe that it does, but I need to check. > >>> [ 59.549036] vdd_sata,avdd_plle: failed to disable >>> >>> [ 59.553778] Failed to disable avdd-plle: -110 >>> >>> [ 59.558150] tegra-pcie 3000.pcie: failed to disable regulators: -110 >>> >>> >>> However, now with your patches the i2c is failing to resume and this >>> breaks system suspend completely for Tegra30. So far this is the only >>> board that appears to break. >>> >>> So the above issue needs to be fixed and I will chat to Thierry about this. >> >> Okay > > So I have been looking at this some more and this starting to all look a > bit of a mess :-( > > Firstly, the Tegra PCI driver suspends late (noirq) as we know. The PCI > driver will warn if it cannot disable the regulators when suspending but > does not actually fail suspend. So this warning is just indicating that > we were unable to disable the regulators. > > Now I don't see that we can ever disable the PCI regulators currently > when entering suspend because ... > > 1. We are in the noirq phase and so we will not get the completion > interrupt for the I2C transfer. I know that you recently added the > atomic I2C transfer support, but we can get the regulator framework > to use this (I have not looked in much detail so far). That's not good :) I didn't realize that *all* interrupts of every device are disabled before .noirq is invoked. It appeared to me that the IRQs disabling and .noirq invocation is performed for the drivers one after another, but now I see that it's not true. https://elixir.bootlin.com/linux/v5.7-rc2/source/drivers/base/power/main.c#L1446 > 2. Even if the regulator framework supported atomic I2C transfers, we > also have the problem that the I2C controller could be runtime- > suspended and pm_runtime_get_sync() will not work during during this > phase to resume it correctly. This is a problem that needs to be > fixed indeed! Could you please clarify why pm_runtime_get_sync() can't be used by the I2C driver's in NOIRQ phase? > 3. Then we also have the possible dependency on the DMA driver that is > suspended during the noirq phase. Yes, this is correct. Again, some regulator drivers may do something on suspend too, although looks like the current upstream Tegra devices are not affected by this potential problem. > It could be argued that if the PCI regulators are never turned off > (currently) then we should not even bother and this will likely resolve > this for now. However, really we should try to fix that correctly. Yes, keeping PCI regulators always-enabled should be a good immediate solution. Also, the RPM's system suspend/resume needs to fixed for the pci-tegra driver, like I already suggested before. > What I still don't understand is why your patch breaks resume. Even if > the I2C transfer fails, and is deemed harmless by the client driver, we > should still be able to suspend and resume correctly. If DMA is getting synchronized after DMA driver being suspended, then it could be a problem. Could you please try to apply this hunk and see if it makes any difference (I'll probably make it as proper patch): --- >8 --- diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index a42c0b4d14ac..55fc7400f717 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -816,6 +816,13 @@ static bool tegra_dma_eoc_interrupt_deasserted(struct tegra_dma_channel *tdc) static void tegra_dma_synchronize(struct dma_chan *dc) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); + int err; + + err = pm_runtime_get_sync(tdc->tdma->dev); + if (err < 0) { + dev_err(tdc2dev(tdc), "Failed to synchronize DMA: %d\n", err); + return; + } /* * CPU, which handles interrupt, could be busy in @@ -825,6 +832,8 @@ static void tegra_dma_synchronize(struct dma_chan *dc) wait_event(tdc->wq, tegra_dma_eoc_interrupt_deasserted(tdc)); tasklet_kill(&tdc->tasklet); + + pm_runtime_put(tdc->tdma->dev); } static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc, --- >8 --- It also could be that there is more than the suspend ordering problem, but for now it is hard to tell without having a detailed log which includes I2C/DMA/RPM traces. Lastly, it should be worthwhile to try to apply the WIP ARM32 KASAN series and see what will happen using CONFIG_KASAN=y. https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=230197
