On 22/04/2020 14:40, Dmitry Osipenko wrote: > 21.04.2020 22:42, Jon Hunter пишет: >> >> On 21/04/2020 16:08, Dmitry Osipenko wrote: >>> 21.04.2020 17:40, Jon Hunter пишет: >>>> >>>> On 21/04/2020 14:25, Dmitry Osipenko wrote: >>>>> 21.04.2020 12:49, Jon Hunter пишет: >>>>> ... >>>>>> I can try the above, but I agree it would be best to avoid messing with >>>>>> the suspend levels if possible. >>>>> >>>>> Will be awesome if you could try it and report back the result. >>>>> >>>> >>>> I gave it a try but suspend still fails. >>> >>> Perhaps the RPM's -EACCES is returned from here: >>> >>> https://elixir.free-electrons.com/linux/v5.7-rc2/source/drivers/base/power/runtime.c#L723 >>> >>> Which suggests that I2C is accessed after being suspended. I guess the >>> PCIe driver suspends after the I2C and somehow my change affected the >>> suspension order, although not sure how. >>> >>> Jon, could you please try to enable PM logging and post the log? Please >>> also post log of the working kernel version, so that we could compare >>> the PM sequence. >>> >>> Something like this should enable the logging: "echo 1 > >>> /sys/power/pm_trace" + there is RPM tracing. >> >> Unfortunately, after enabling that I don't any output and so no help there. > > 1. I now tried to check the pm_trace myself and found that it's > available only on X86, my bad. > > 2. Jon, could you please clarify what exactly you were trying to test? > > 3. Is it only the Cardhu board that is affected by this problem? > > 4. Could you please try to add this to the kernel's cmdline and post the > logs: > > tp_printk > trace_event=rpm_suspend,rpm_resume,rpm_usage,rpm_idle,rpm_return_int So I think that part of the problem already existed prior to these patches. Without your patches I see ... [ 59.543528] tegra-i2c 7000d000.i2c: i2c transfer timed out [ 59.549036] vdd_sata,avdd_plle: failed to disable [ 59.553778] Failed to disable avdd-plle: -110 [ 59.558150] tegra-pcie 3000.pcie: failed to disable regulators: -110 However, now with your patches the i2c is failing to resume and this breaks system suspend completely for Tegra30. So far this is the only board that appears to break. So the above issue needs to be fixed and I will chat to Thierry about this. Jon -- nvpublic
