On 12/9/19 3:12 PM, Dmitry Osipenko wrote:
10.12.2019 02:05, Sowjanya Komatineni пишет:
On 12/9/19 12:06 PM, Dmitry Osipenko wrote:
07.12.2019 22:20, Sowjanya Komatineni пишет:
On 12/7/19 6:58 AM, Dmitry Osipenko wrote:
06.12.2019 05:48, Sowjanya Komatineni пишет:
Current ASoC driver uses extern1 as cdev1 clock from Tegra30 onwards
through device tree.
Actual audio mclk is clk_out_1 and to use PLLA for mclk rate control,
need to clk_out_1_mux parent to extern1 and extern1 parent to
PLLA_OUT0.
Currently Tegra clock driver init sets the parents and enables both
clk_out_1 and extern1 clocks. But these clocks parent and enables
should
be controlled by ASoC driver.
Clock parents can be specified in device tree using assigned-clocks
and assigned-clock-parents.
To enable audio mclk, both clk_out_1 and extern1 clocks need to be
enabled.
This patch configures parents for clk_out_1 and extern1 clocks if
device
tree does not specify clock parents inorder to support old device tree
and controls mclk using both clk_out_1 and extern1 clocks.
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
sound/soc/tegra/tegra_asoc_utils.c | 66
++++++++++++++++++++++++++++++++++++++
sound/soc/tegra/tegra_asoc_utils.h | 1 +
2 files changed, 67 insertions(+)
diff --git a/sound/soc/tegra/tegra_asoc_utils.c
b/sound/soc/tegra/tegra_asoc_utils.c
index 536a578e9512..8e3a3740df7c 100644
--- a/sound/soc/tegra/tegra_asoc_utils.c
+++ b/sound/soc/tegra/tegra_asoc_utils.c
@@ -60,6 +60,7 @@ int tegra_asoc_utils_set_rate(struct
tegra_asoc_utils_data *data, int srate,
data->set_mclk = 0;
clk_disable_unprepare(data->clk_cdev1);
+ clk_disable_unprepare(data->clk_extern1);
clk_disable_unprepare(data->clk_pll_a_out0);
clk_disable_unprepare(data->clk_pll_a);
@@ -89,6 +90,14 @@ int tegra_asoc_utils_set_rate(struct
tegra_asoc_utils_data *data, int srate,
return err;
}
+ if (!IS_ERR_OR_NULL(data->clk_extern1)) {
+ err = clk_prepare_enable(data->clk_extern1);
+ if (err) {
+ dev_err(data->dev, "Can't enable extern1: %d\n", err);
+ return err;
+ }
+ }
+
err = clk_prepare_enable(data->clk_cdev1);
if (err) {
dev_err(data->dev, "Can't enable cdev1: %d\n", err);
@@ -109,6 +118,7 @@ int tegra_asoc_utils_set_ac97_rate(struct
tegra_asoc_utils_data *data)
int err;
clk_disable_unprepare(data->clk_cdev1);
+ clk_disable_unprepare(data->clk_extern1);
clk_disable_unprepare(data->clk_pll_a_out0);
clk_disable_unprepare(data->clk_pll_a);
@@ -142,6 +152,14 @@ int tegra_asoc_utils_set_ac97_rate(struct
tegra_asoc_utils_data *data)
return err;
}
+ if (!IS_ERR_OR_NULL(data->clk_extern1)) {
+ err = clk_prepare_enable(data->clk_extern1);
+ if (err) {
+ dev_err(data->dev, "Can't enable extern1: %d\n", err);
+ return err;
+ }
+ }
Why this is needed given that clk_extern1 is either a child of MCLK or
MCLK itself (on T20)? The child clocks are enabled when the parent is
enabled.
For T30 and later, clk_extern1 is one of the source for clk_out_1_mux.
clk_extern1 is in CAR and it has its own gate and mux.
As audio mclk related clocks (clk_out_1, clk_out_1_mux, and extern1) are
moved into ASoC driver from clock driver
need to enable extern1 gate as well along with clk_out1 for T30 through
T210.
Just FYI, extern1 enable here happens only when data->clk_extern1 is
available which is for T30 onwards.
clk_out_1 is the parent of extern1, thus extern1 is enabled by the clk
core whenever clk_out_1 is enabled because data->clk_cdev1=clk_out_1. An
I missing something?
[snip]
extern1 is the parent for clk_out_1. explained extern1 clock path to
clk_out in reply to your comment in other patch of this series.
Right, I meant extern1 the parent of clk_out_1, sorry for the confusion.
So when clk_out_1 (child) is enabled, extern1 (parent) is enabled as well.
I'll take a closer look at the other email tomorrow.
yes, will remove explicitly enabling extern1 in next version.
