Re: [PATCH v3 08/15] ASoC: tegra: Add audio mclk control through clk_out_1 and extern1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



10.12.2019 02:05, Sowjanya Komatineni пишет:
> 
> On 12/9/19 12:06 PM, Dmitry Osipenko wrote:
>> 07.12.2019 22:20, Sowjanya Komatineni пишет:
>>> On 12/7/19 6:58 AM, Dmitry Osipenko wrote:
>>>> 06.12.2019 05:48, Sowjanya Komatineni пишет:
>>>>> Current ASoC driver uses extern1 as cdev1 clock from Tegra30 onwards
>>>>> through device tree.
>>>>>
>>>>> Actual audio mclk is clk_out_1 and to use PLLA for mclk rate control,
>>>>> need to clk_out_1_mux parent to extern1 and extern1 parent to
>>>>> PLLA_OUT0.
>>>>>
>>>>> Currently Tegra clock driver init sets the parents and enables both
>>>>> clk_out_1 and extern1 clocks. But these clocks parent and enables
>>>>> should
>>>>> be controlled by ASoC driver.
>>>>>
>>>>> Clock parents can be specified in device tree using assigned-clocks
>>>>> and assigned-clock-parents.
>>>>>
>>>>> To enable audio mclk, both clk_out_1 and extern1 clocks need to be
>>>>> enabled.
>>>>>
>>>>> This patch configures parents for clk_out_1 and extern1 clocks if
>>>>> device
>>>>> tree does not specify clock parents inorder to support old device tree
>>>>> and controls mclk using both clk_out_1 and extern1 clocks.
>>>>>
>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
>>>>> ---
>>>>>    sound/soc/tegra/tegra_asoc_utils.c | 66
>>>>> ++++++++++++++++++++++++++++++++++++++
>>>>>    sound/soc/tegra/tegra_asoc_utils.h |  1 +
>>>>>    2 files changed, 67 insertions(+)
>>>>>
>>>>> diff --git a/sound/soc/tegra/tegra_asoc_utils.c
>>>>> b/sound/soc/tegra/tegra_asoc_utils.c
>>>>> index 536a578e9512..8e3a3740df7c 100644
>>>>> --- a/sound/soc/tegra/tegra_asoc_utils.c
>>>>> +++ b/sound/soc/tegra/tegra_asoc_utils.c
>>>>> @@ -60,6 +60,7 @@ int tegra_asoc_utils_set_rate(struct
>>>>> tegra_asoc_utils_data *data, int srate,
>>>>>        data->set_mclk = 0;
>>>>>          clk_disable_unprepare(data->clk_cdev1);
>>>>> +    clk_disable_unprepare(data->clk_extern1);
>>>>>        clk_disable_unprepare(data->clk_pll_a_out0);
>>>>>        clk_disable_unprepare(data->clk_pll_a);
>>>>>    @@ -89,6 +90,14 @@ int tegra_asoc_utils_set_rate(struct
>>>>> tegra_asoc_utils_data *data, int srate,
>>>>>            return err;
>>>>>        }
>>>>>    +    if (!IS_ERR_OR_NULL(data->clk_extern1)) {
>>>>> +        err = clk_prepare_enable(data->clk_extern1);
>>>>> +        if (err) {
>>>>> +            dev_err(data->dev, "Can't enable extern1: %d\n", err);
>>>>> +            return err;
>>>>> +        }
>>>>> +    }
>>>>> +
>>>>>        err = clk_prepare_enable(data->clk_cdev1);
>>>>>        if (err) {
>>>>>            dev_err(data->dev, "Can't enable cdev1: %d\n", err);
>>>>> @@ -109,6 +118,7 @@ int tegra_asoc_utils_set_ac97_rate(struct
>>>>> tegra_asoc_utils_data *data)
>>>>>        int err;
>>>>>          clk_disable_unprepare(data->clk_cdev1);
>>>>> +    clk_disable_unprepare(data->clk_extern1);
>>>>>        clk_disable_unprepare(data->clk_pll_a_out0);
>>>>>        clk_disable_unprepare(data->clk_pll_a);
>>>>>    @@ -142,6 +152,14 @@ int tegra_asoc_utils_set_ac97_rate(struct
>>>>> tegra_asoc_utils_data *data)
>>>>>            return err;
>>>>>        }
>>>>>    +    if (!IS_ERR_OR_NULL(data->clk_extern1)) {
>>>>> +        err = clk_prepare_enable(data->clk_extern1);
>>>>> +        if (err) {
>>>>> +            dev_err(data->dev, "Can't enable extern1: %d\n", err);
>>>>> +            return err;
>>>>> +        }
>>>>> +    }
>>>> Why this is needed given that clk_extern1 is either a child of MCLK or
>>>> MCLK itself (on T20)? The child clocks are enabled when the parent is
>>>> enabled.
>>> For T30 and later, clk_extern1 is one of the source for clk_out_1_mux.
>>> clk_extern1 is in CAR and it has its own gate and mux.
>>>
>>> As audio mclk related clocks (clk_out_1, clk_out_1_mux, and extern1) are
>>> moved into ASoC driver from clock driver
>>>
>>> need to enable extern1 gate as well along with clk_out1 for T30 through
>>> T210.
>>>
>>> Just FYI, extern1 enable here happens only when data->clk_extern1 is
>>> available which is for T30 onwards.
>> clk_out_1 is the parent of extern1, thus extern1 is enabled by the clk
>> core whenever clk_out_1 is enabled because data->clk_cdev1=clk_out_1. An
>> I missing something?
>>
>> [snip]
> extern1 is the parent for clk_out_1. explained extern1 clock path to
> clk_out in reply to your comment in other patch of this series.

Right, I meant extern1 the parent of clk_out_1, sorry for the confusion.
So when clk_out_1 (child) is enabled, extern1 (parent) is enabled as well.

I'll take a closer look at the other email tomorrow.



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux