From: Thierry Reding <treding@xxxxxxxxxx>
The address width of the controller can be read from hardware feature
registers much like on XGMAC. Add support for parsing the ADDR64 field
so that the DMA mask can be set accordingly.
This avoids getting swiotlb involved for DMA on Tegra186 and later.
Also make sure that the upper 32 bits of the DMA address are written to
the DMA descriptors when enhanced addressing mode is used.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 1 +
.../ethernet/stmicro/stmmac/dwmac4_descs.c | 4 ++--
.../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 20 +++++++++++++++++++
.../net/ethernet/stmicro/stmmac/dwmac4_dma.h | 1 +
4 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 2ed11a581d80..f634fa09dffc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -183,6 +183,7 @@ enum power_event {
#define GMAC_HW_HASH_TB_SZ GENMASK(25, 24)
#define GMAC_HW_FEAT_AVSEL BIT(20)
#define GMAC_HW_TSOEN BIT(18)
+#define GMAC_HW_ADDR64 GENMASK(15, 14)
#define GMAC_HW_TXFIFOSIZE GENMASK(10, 6)
#define GMAC_HW_RXFIFOSIZE GENMASK(4, 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index dbde23e7e169..d546041d2fcd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -431,8 +431,8 @@ static void dwmac4_get_addr(struct dma_desc *p, unsigned int *addr)
static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
{
- p->des0 = cpu_to_le32(addr);
- p->des1 = 0;
+ p->des0 = cpu_to_le32(lower_32_bits(addr));
+ p->des1 = cpu_to_le32(upper_32_bits(addr));
}
static void dwmac4_clear(struct dma_desc *p)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 3ed5508586ef..23dfbd0efc37 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -132,6 +132,9 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
if (dma_cfg->aal)
value |= DMA_SYS_BUS_AAL;
+ if (dma_cfg->eame)
+ value |= DMA_SYS_BUS_EAME;
+
writel(value, ioaddr + DMA_SYS_BUS_MODE);
}
@@ -354,6 +357,23 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
dma_cap->hash_tb_sz = (hw_cap & GMAC_HW_HASH_TB_SZ) >> 24;
dma_cap->av = (hw_cap & GMAC_HW_FEAT_AVSEL) >> 20;
dma_cap->tsoen = (hw_cap & GMAC_HW_TSOEN) >> 18;
+
+ dma_cap->addr64 = (hw_cap & GMAC_HW_ADDR64) >> 14;
+ switch (dma_cap->addr64) {
+ case 0:
+ dma_cap->addr64 = 32;
+ break;
+ case 1:
+ dma_cap->addr64 = 40;
+ break;
+ case 2:
+ dma_cap->addr64 = 48;
+ break;
+ default:
+ dma_cap->addr64 = 32;
+ break;
+ }
+
/* RX and TX FIFO sizes are encoded as log2(n / 128). Undo that by
* shifting and store the sizes in bytes.
*/
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index b66da0237d2a..d00776db20d6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -65,6 +65,7 @@
#define DMA_SYS_BUS_MB BIT(14)
#define DMA_AXI_1KBBE BIT(13)
#define DMA_SYS_BUS_AAL BIT(12)
+#define DMA_SYS_BUS_EAME BIT(11)
#define DMA_AXI_BLEN256 BIT(7)
#define DMA_AXI_BLEN128 BIT(6)
#define DMA_AXI_BLEN64 BIT(5)
--
2.23.0
