Re: [PATCH V7] i2c: tegra: remove BUG, BUG_ON

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/17/19 5:13 AM, Dmitry Osipenko wrote:
17.06.2019 8:09, Bitan Biswas пишет:
Remove BUG, BUG_ON as it makes system usable:
  - Remove redundant BUG_ON calls or replace with WARN_ON_ONCE
    as needed.
  - Remove BUG() and mask Rx interrupt similar as Tx
    for message fully sent case.
  - Add caller error handling and WARN_ON_ONCE check for non-zero
    rx_fifo_avail in tegra_i2c_empty_rx_fifo() after all processing.

The commit message should describe motivation of the change and not the change itself,
unless it's some additional information which is required for better understanding of
the code.

In yours case it could be something like that:

     The usage of BUG() macro is generally discouraged in kernel, unless
     it's a problem that results in a physical damage or loss of data.
     This patch removes unnecessary BUG() macros and replaces the rest
     with a warnings.
I shall update as per above comments.


Signed-off-by: Bitan Biswas <bbiswas@xxxxxxxxxx>
---
  drivers/i2c/busses/i2c-tegra.c | 45 ++++++++++++++++++++++++++++++++++--------
  1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4dfb4c1..b155b61 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -73,6 +73,7 @@
  #define I2C_ERR_NO_ACK				BIT(0)
  #define I2C_ERR_ARBITRATION_LOST		BIT(1)
  #define I2C_ERR_UNKNOWN_INTERRUPT		BIT(2)
+#define I2C_ERR_RX_BUFFER_OVERFLOW		BIT(3)
#define PACKET_HEADER0_HEADER_SIZE_SHIFT 28
  #define PACKET_HEADER0_PACKET_ID_SHIFT		16
@@ -515,7 +516,11 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
  	 * prevent overwriting past the end of buf
  	 */
  	if (rx_fifo_avail > 0 && buf_remaining > 0) {
-		BUG_ON(buf_remaining > 3);
+		/*
+		 * buf_remaining > 3 check not needed as rx_fifo_avail == 0
+		 * when (words_to_transfer was > rx_fifo_avail) earlier
+		 * in this function.
+		 */
  		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
  		val = cpu_to_le32(val);
  		memcpy(buf, &val, buf_remaining);
@@ -523,7 +528,15 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
  		rx_fifo_avail--;
  	}
- BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
+	if ((!(i2c_dev->msg_buf_remaining)) &&

The RX FIFO shall be drained completely no matter what.

Hence why the "i2c_dev->msg_buf_remaining" checking is needed here?
I moved the part of below condition in Patch V6 to function tegra_i2c_empty_rx_fifo:

>> +			err_val = tegra_i2c_empty_rx_fifo(i2c_dev);
>> +			if ((!(i2c_dev->msg_buf_remaining)) &&

> Let's move this check into tegra_i2c_empty_rx_fifo() and return -EINVAL for that case.
> This will make code to look cleaner.

Is above condition not needed?



Secondly, in the future please don't add parens where they are not needed. In this
case parens around !i2c_dev->msg_buf_remaining are not needed at all.

I shall look out for similar unnecessary parentheses and update the patch.

+	    WARN_ON_ONCE(rx_fifo_avail))
+		return -EINVAL;
+
+	/*
+	 * buf_remaining > 0 at this point can only have rx_fifo_avail == 0

The rx_fifo_avail is always 0 at this point, including the case of buf_remaining == 0.
It will be better if you'll add a comment for the WARN_ON_ONCE(rx_fifo_avail) above,
saying that RX FIFO must be fully drained, and then just drop this comment.


OK.

+	 * as this corresponds to (words_to_transfer was > rx_fifo_avail)
+	 * case earlier in this function.
+	 */
  	i2c_dev->msg_buf_remaining = buf_remaining;
  	i2c_dev->msg_buf = buf;

[snip]





[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux