Re: [PATCH 03/30] PCI: tegra: Move REFCLK pad settings out of phy_power_on()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 11, 2019 at 10:33:28PM +0530, Manikanta Maddireddy wrote:
> In Tegra186 PHY programming is done by BPMP-FW, so PHY calls are skipped
> in driver. REFCLK pad settings are independent of PHY and should be
> programmed by driver. So move REFCLK pad settings out of phy_power_on().
> These pad settings tune REFCLK peak to peak amplitude.
> 
> Fixes: cf5d31801278 ("PCI: tegra: Program PADS_REFCLK_CFG* always, not
> just on legacy SoCs")
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> ---
>  drivers/pci/controller/pci-tegra.c | 20 +++++++++++++-------
>  1 file changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
> index 0bf270bcea34..a61ce9d475b4 100644
> --- a/drivers/pci/controller/pci-tegra.c
> +++ b/drivers/pci/controller/pci-tegra.c
> @@ -852,7 +852,6 @@ static int tegra_pcie_port_phy_power_off(struct tegra_pcie_port *port)
>  static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
>  {
>  	struct device *dev = pcie->dev;
> -	const struct tegra_pcie_soc *soc = pcie->soc;
>  	struct tegra_pcie_port *port;
>  	int err;
>  
> @@ -878,12 +877,6 @@ static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
>  		}
>  	}
>  
> -	/* Configure the reference clock driver */
> -	pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
> -
> -	if (soc->num_ports > 2)
> -		pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
> -
>  	return 0;
>  }
>  
> @@ -2092,11 +2085,24 @@ static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
>  	return false;
>  }
>  
> +static void tegra_pcie_apply_pad_settings(struct tegra_pcie *pcie)
> +{
> +	const struct tegra_pcie_soc *soc = pcie->soc;
> +
> +	/* Configure the reference clock driver */
> +	pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
> +
> +	if (soc->num_ports > 2)
> +		pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
> +}
> +
>  static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
>  {
>  	struct device *dev = pcie->dev;
>  	struct tegra_pcie_port *port, *tmp;
>  
> +	tegra_pcie_apply_pad_settings(pcie);
> +
>  	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
>  		dev_info(dev, "probing port %u, using %u lanes\n",
>  			 port->index, port->lanes);

This also seems to move the programming of these registers to a
different point in time. Was that intentional? If so, please mention it
in the commit message and describe why that's necessary.

If that was not intentional, it seems like the right place to call this
would be right after the call to tegra_pcie_enable_controller() in
tegra_pcie_pm_resume().

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux