Re: [PATCH 1/6] dt-bindings: timer: add Tegra210 timer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/25/19 8:01 PM, Jon Hunter wrote:

On 25/01/2019 03:23, Joseph Lo wrote:
Hi Jon,

Thanks for reviewing.

On 1/24/19 6:30 PM, Jon Hunter wrote:

On 07/01/2019 03:28, Joseph Lo wrote:
The Tegra210 timer provides fourteen 29-bit timer counters and one
32-bit
timestamp counter. The TMRs run at either a fixed 1 MHz clock rate
derived
from the oscillator clock (TMR0-TMR9) or directly at the oscillator
clock
(TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic,
or watchdog interrupts.

Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx>
---
   .../bindings/timer/nvidia,tegra210-timer.txt  | 25 +++++++++++++++++++
   1 file changed, 25 insertions(+)
   create mode 100644
Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt

diff --git
a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
new file mode 100644
index 000000000000..ba511220a669
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
@@ -0,0 +1,25 @@
+NVIDIA Tegra210 timer
+
+The Tegra210 timer provides fourteen 29-bit timer counters and one
32-bit
+timestamp counter. The TMRs run at either a fixed 1 MHz clock rate
derived
+from the oscillator clock (TMR0-TMR9) or directly at the oscillator
clock
+(TMR10-TMR13). Each TMR can be programmed to generate one-shot,
periodic,
+or watchdog interrupts.
+
+Required properties:
+- compatible : "nvidia,tegra210-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one per each of TMR10 through
TMR13.

[snip]
And notice that only TMR10-TMR13 are running at the oscillator clock
(clk_m). With the Tegra210 timer driver, we introduce in this series,
which only replace the clock event device function that was originally
owned by the arch timer (armv8 timer) and it also running at the
oscillator clock. The sched_timer still owns by the arch timer. So the
timer resolution will be the same. That's why we choose TMR10-TMR13 as
the timer for Tegra210.

That maybe fine, but DT should describe the hardware and so I don't see
why we would not list all the interrupts. We can still only use TMR10-13
in the driver.


Okay, will list all the interrupts for each timer channel.

Thanks,
Joseph




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux