Re: [PATCH v6 3/4] thermal: tegra: parse sensor id before sensor register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 19, 2018 at 11:00:10AM +0800, Wei Ni wrote:
> 
> 
> On 19/12/2018 9:24 AM, Eduardo Valentin wrote:
> > On Fri, Dec 14, 2018 at 05:49:52PM +0800, Wei Ni wrote:
> >> Since different platforms may not support all 4
> >> sensors, so the sensor registration may be failed.
> >> Add codes to parse dt to find sensor id which
> >> need to be registered. So that the registration
> >> can be successful on all platform.
> >>
> >> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
> >> ---
> >>  drivers/thermal/tegra/soctherm.c | 45 ++++++++++++++++++++++++++++++++++++++--
> >>  1 file changed, 43 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
> >> index fd2703c0cfc5..6bee31cd4621 100644
> >> --- a/drivers/thermal/tegra/soctherm.c
> >> +++ b/drivers/thermal/tegra/soctherm.c
> >> @@ -1224,6 +1224,41 @@ static void soctherm_init(struct platform_device *pdev)
> >>  	tegra_soctherm_throttle(&pdev->dev);
> >>  }
> >>  
> >> +static bool tegra_soctherm_find_sensor_id(unsigned int sensor_id)
> >> +{
> >> +	bool ret = false;
> >> +	struct of_phandle_args sensor_specs;
> >> +	struct device_node *np, *sensor_np;
> >> +
> >> +	np = of_find_node_by_name(NULL, "thermal-zones");
> >> +	if (!np)
> >> +		return ret;
> >> +
> >> +	for_each_available_child_of_node(np, sensor_np) {
> >> +		if (of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> >> +						 "#thermal-sensor-cells",
> >> +						 0, &sensor_specs))
> >> +			continue;
> >> +
> >> +		if (sensor_specs.args_count != 1) {
> >> +			WARN(sensor_specs.args_count != 1,
> >> +			     "%s: wrong cells in sensor specifier %d\n",
> >> +			     sensor_specs.np->name, sensor_specs.args_count);
> >> +			continue;
> >> +		}
> >> +
> >> +		if (sensor_specs.args[0] == sensor_id) {
> >> +			of_node_put(sensor_np);
> >> +			ret = true;
> >> +			break;
> >> +		}
> >> +	}
> >> +
> >> +	of_node_put(np);
> >> +
> >> +	return ret;
> >> +}
> > 
> > So, I am still failing to see why this is really needed. 
> > 
> > Why can't you simply resolve this with different compatibles?
> > If the sensor is not present or disabled, the compatible is not, well,
> > compatible anymore.
> 
> This driver can support three Tegra chip t124, t132 and t210. And we
> also support some platforms for every chips. As the description in the
> commit, different platforms may not support all 4 sensors, so I
> upstreamed this patch.

ok.. Which means, all platforms need to have a proper DT that describes
the correct amount of sensors.

> If we use different compatibles, I think we can't resolve it simply,
> because we also need to add codes to configure which platform support
> which sensors, and may add more in the future. If use this patch, we

There is a very common way of solving this, you can pass .data and grab
after calling of_node_match(), just like the tegra soc thermal driver
already does.

> doesn't need to do any more in the future.

Well, if the patch is needed to add support for different versions of
your sensor block, then there is no reason why not patching.

> Actually in my original change, I just ignore the registration failure
> to fix this issue, it will not affect loading driver, but as Daniel's
> comment, it's not better to ignore, so I followed his comment to refer

It is not good to ignore. The correct thing to do here is for tegra to
have correct DT entries for each sensor block version, to correctly
represent the amount of sensors present in the RTL, then you reflect
that in device driver using compatible. This way you wont need to ignore
failures, and you will support the correct amount of sensors for each
block version.

> the QORIQ thermal driver to get the sensor id.
> 

I am not sure that is a good example to follow.

> Thanks.
> Wei.
> 
> > 
> >> +
> >>  static const struct of_device_id tegra_soctherm_of_match[] = {
> >>  #ifdef CONFIG_ARCH_TEGRA_124_SOC
> >>  	{
> >> @@ -1365,13 +1400,16 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
> >>  		zone->sg = soc->ttgs[i];
> >>  		zone->ts = tegra;
> >>  
> >> +		if (!tegra_soctherm_find_sensor_id(soc->ttgs[i]->id))
> >> +			continue;
> >> +
> >>  		z = devm_thermal_zone_of_sensor_register(&pdev->dev,
> >>  							 soc->ttgs[i]->id, zone,
> >>  							 &tegra_of_thermal_ops);
> >>  		if (IS_ERR(z)) {
> >>  			err = PTR_ERR(z);
> >> -			dev_err(&pdev->dev, "failed to register sensor: %d\n",
> >> -				err);
> >> +			dev_err(&pdev->dev, "failed to register sensor %s: %d\n",
> >> +				soc->ttgs[i]->name, err);
> >>  			goto disable_clocks;
> >>  		}
> >>  
> >> @@ -1434,6 +1472,9 @@ static int __maybe_unused soctherm_resume(struct device *dev)
> >>  		struct thermal_zone_device *tz;
> >>  
> >>  		tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
> >> +		if (!tz)
> >> +			continue;
> >> +
> >>  		err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
> >>  		if (err) {
> >>  			dev_err(&pdev->dev,
> >> -- 
> >> 2.7.4
> >>



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux