Okay, will change the commit message for now as suggested >-----Original Message----- >From: Mikko Perttunen [mailto:cyndis@xxxxxxxx] >Sent: Tuesday, January 23, 2018 9:04 PM >To: Preetham Chandru <pchandru@xxxxxxxxxx>; thierry.reding@xxxxxxxxx; >tj@xxxxxxxxxx >Cc: preetham260@xxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux- >ide@xxxxxxxxxxxxxxx; Venu Byravarasu <vbyravarasu@xxxxxxxxxx>; Pavan >Kunapuli <pkunapuli@xxxxxxxxxx> >Subject: Re: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1 > >I have usually split the change in chip .dtsi and board .dtsi/.dts in separate >commits. I don't know if that's necessary though. > >This does however require a commit message, like > > Add sata node to the Tegra210 device tree, and enable the device and > assign board-specific properties on Jetson TX1. > >Mikko > >On 01/09/2018 09:17 AM, Preetham Chandru Ramchandra wrote: >> From: Preetham Ramchandra <pchandru@xxxxxxxxxx> >> >> Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx> >> --- >> v4: >> * Fixed missing space after 'AUX' >> --- >> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 6 ++++++ >> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 16 ++++++++++++++++ >> 2 files changed, 22 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> index d67ef4319f3b..2aa2979cd6b5 100644 >> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi >> @@ -1325,6 +1325,12 @@ >> status = "okay"; >> }; >> >> + sata@70020000 { >> + status = "okay"; >> + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; >> + phy-names = "sata-0"; >> + }; >> + >> padctl@7009f000 { >> status = "okay"; >> >> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi >> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi >> index 9c2402108772..bf72db5386a5 100644 >> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi >> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi >> @@ -798,6 +798,22 @@ >> #iommu-cells = <1>; >> }; >> >> + sata@70020000 { >> + compatible = "nvidia,tegra210-ahci"; >> + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ >> + <0x0 0x70020000 0x0 0x7000>, /* SATA */ >> + <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */ >> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&tegra_car TEGRA210_CLK_SATA>, >> + <&tegra_car TEGRA210_CLK_SATA_OOB>; >> + clock-names = "sata", "sata-oob"; >> + resets = <&tegra_car 124>, >> + <&tegra_car 123>, >> + <&tegra_car 129>; >> + reset-names = "sata", "sata-oob", "sata-cold"; >> + status = "disabled"; >> + }; >> + >> hda@70030000 { >> compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; >> reg = <0x0 0x70030000 0x0 0x10000>; >> ��.n��������+%������w��{.n�����{��נ���^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
