>-----Original Message----- >From: Mikko Perttunen [mailto:cyndis@xxxxxxxx] >Sent: Tuesday, January 23, 2018 9:02 PM >To: Preetham Chandru <pchandru@xxxxxxxxxx>; thierry.reding@xxxxxxxxx; >tj@xxxxxxxxxx >Cc: preetham260@xxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux- >ide@xxxxxxxxxxxxxxx; Venu Byravarasu <vbyravarasu@xxxxxxxxxx>; Pavan >Kunapuli <pkunapuli@xxxxxxxxxx> >Subject: Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation > >Also the commit subject needs to specify it's about ahci-tegra. > Okay. >On 01/23/2018 05:30 PM, Mikko Perttunen wrote: >> On 01/09/2018 09:17 AM, Preetham Chandru Ramchandra wrote: >>> From: Preetham Ramchandra <pchandru@xxxxxxxxxx> >>> >>> This adds bindings documentation for the AHCI controller on Tegra210 >>> >>> Signed-off-by: Preetham Chandru R <pchandru@xxxxxxxxxx> >>> --- >>> v4: >>> * changed the commit message >>> * changed 'sata-cold' reset to mandatory for t210 and t124 >>> * Removed the regulators for T210 since these regulators >>> will be enabled in phy driver. >>> v3: >>> * Add AUX register. >>> v2: >>> * change cml1, pll_e and phy regulators as optional >>> for T210. >>> --- >>> .../bindings/ata/nvidia,tegra124-ahci.txt | 38 >>> ++++++++++++++-------- >>> 1 file changed, 25 insertions(+), 13 deletions(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >>> b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >>> index 66c83c3e8915..df4dc2c78ee8 100644 >>> --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >>> +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt >>> @@ -1,20 +1,19 @@ >>> -Tegra124 SoC SATA AHCI controller >>> +Tegra SoC SATA AHCI controller >>> Required properties : >>> -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". >>> Otherwise, >>> - must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where >>> <chip> >>> - is tegra132. >>> -- reg : Should contain 2 entries: >>> +- compatible : Must be one of: >>> + - Tegra124 : "nvidia,tegra124-ahci" >>> + - Tegra210 : "nvidia,tegra210-ahci" >>> +- reg : Should contain 3 entries: >>> - AHCI register set (SATA BAR5) >>> - SATA register set >>> + - Tegra210 : AUX register set >>> - interrupts : Defines the interrupt used by SATA >>> - clocks : Must contain an entry for each entry in clock-names. >>> See ../clocks/clock-bindings.txt for details. >>> - clock-names : Must include the following entries: >>> - sata >>> - sata-oob >>> - - cml1 >>> - - pll_e >>> - resets : Must contain an entry for each entry in reset-names. >>> See ../reset/reset.txt for details. >>> - reset-names : Must include the following entries: >>> @@ -24,9 +23,22 @@ Required properties : >>> - phys : Must contain an entry for each entry in phy-names. >>> See ../phy/phy-bindings.txt for details. >>> - phy-names : Must include the following entries: >>> - - sata-phy : XUSB PADCTL SATA PHY >>> -- hvdd-supply : Defines the SATA HVDD regulator >>> -- vddio-supply : Defines the SATA VDDIO regulator >>> -- avdd-supply : Defines the SATA AVDD regulator >>> -- target-5v-supply : Defines the SATA 5V power regulator >>> -- target-12v-supply : Defines the SATA 12V power regulator >>> + - For T124: >>> + - sata-phy : XUSB PADCTL SATA PHY >>> + - For T210: >>> + - sata-0 >>> +- For T124: >>> + - hvdd-supply : Defines the SATA HVDD regulator >>> + - vddio-supply : Defines the SATA VDDIO regulator >>> + - avdd-supply : Defines the SATA AVDD regulator >>> + - target-5v-supply : Defines the SATA 5V power regulator >>> + - target-12v-supply : Defines the SATA 12V power regulator >>> + >>> +Optional properties: >>> +- clock-names : >>> + - cml1 : >>> + cml1 clock is required by phy so it is optional to define >>> + here as phy driver will be enabling this clock. >>> + - pll_e : >>> + pll_e is the parent of cml1 clock so it is optional to define >>> + here as phy driver will be enabling this clock. >>> >> >> We should drop the pll_e here since CCF should handle that >> automatically as CML1 is a child clock of it. I also had some >> primarily cosmetic change suggestions to this in v5. I'd still like to >> see those go in - it's of course possible to also apply these changes >> while applying the patch. >> Okay >> Mikko >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-tegra" >> in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo >> info at http://vger.kernel.org/majordomo-info.html ��.n��������+%������w��{.n�����{��נ���^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
