On 25-Jan-18 8:18 PM, Thierry Reding wrote: > On Thu, Jan 11, 2018 at 11:38:08AM +0530, Manikanta Maddireddy wrote: >> Tegra186 powergate driver is implemented as power domain driver, power >> partition ungate/gate are registered as power_on/power_off callback >> functions. There are no direct functions to power gate/ungate host >> controller in Tegra186. Host controller driver should add "power-domains" >> property in device tree and implement runtime suspend and resume >> callback functons. Power gate and ungate is taken care by power domain >> driver when host controller driver calls pm_runtime_put_sync and >> pm_runtime_get_sync respectively. >> >> Register suspend_noirq & resume_noirq callback functions to allow PCIe to >> come up after resume from RAM. Both runtime and noirq pm ops share same >> callback functions. >> >> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> >> --- >> V2: >> * no change in this patch >> V3: >> * no change in this patch >> V4: >> * no change in this patch >> V5: >> * Decoupled from https://patchwork.ozlabs.org/patch/832053/ and >> rebased on linux-next >> V6: >> * no change in this patch >> >> drivers/pci/host/pci-tegra.c | 181 ++++++++++++++++++++++++++----------------- >> 1 file changed, 110 insertions(+), 71 deletions(-) >> >> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > [...] >> @@ -1536,37 +1526,41 @@ static int tegra_pcie_enable_msi(struct tegra_pcie *pcie) >> int err; >> u32 reg; >> >> - mutex_init(&msi->lock); >> + if (!msi->phys) { >> + mutex_init(&msi->lock); >> >> - msi->chip.dev = dev; >> - msi->chip.setup_irq = tegra_msi_setup_irq; >> - msi->chip.teardown_irq = tegra_msi_teardown_irq; >> + msi->chip.dev = dev; >> + msi->chip.setup_irq = tegra_msi_setup_irq; >> + msi->chip.teardown_irq = tegra_msi_teardown_irq; >> >> - msi->domain = irq_domain_add_linear(dev->of_node, INT_PCI_MSI_NR, >> - &msi_domain_ops, &msi->chip); >> - if (!msi->domain) { >> - dev_err(dev, "failed to create IRQ domain\n"); >> - return -ENOMEM; >> - } >> + msi->domain = irq_domain_add_linear(dev->of_node, >> + INT_PCI_MSI_NR, >> + &msi_domain_ops, >> + &msi->chip); >> + if (!msi->domain) { >> + dev_err(dev, "failed to create IRQ domain\n"); >> + return -ENOMEM; >> + } >> >> - err = platform_get_irq_byname(pdev, "msi"); >> - if (err < 0) { >> - dev_err(dev, "failed to get IRQ: %d\n", err); >> - goto err; >> - } >> + err = platform_get_irq_byname(pdev, "msi"); >> + if (err < 0) { >> + dev_err(dev, "failed to get IRQ: %d\n", err); >> + goto err; >> + } >> >> - msi->irq = err; >> + msi->irq = err; >> >> - err = request_irq(msi->irq, tegra_pcie_msi_irq, IRQF_NO_THREAD, >> - tegra_msi_irq_chip.name, pcie); >> - if (err < 0) { >> - dev_err(dev, "failed to request IRQ: %d\n", err); >> - goto err; >> - } >> + err = request_irq(msi->irq, tegra_pcie_msi_irq, IRQF_NO_THREAD, >> + tegra_msi_irq_chip.name, pcie); >> + if (err < 0) { >> + dev_err(dev, "failed to request IRQ: %d\n", err); >> + goto err; >> + } >> >> - /* setup AFI/FPCI range */ >> - msi->pages = __get_free_pages(GFP_KERNEL, 0); >> - msi->phys = virt_to_phys((void *)msi->pages); >> + /* setup AFI/FPCI range */ >> + msi->pages = __get_free_pages(GFP_KERNEL, 0); >> + msi->phys = virt_to_phys((void *)msi->pages); >> + } > > I think it'd be better to split this off into a separate function so > that we can get rid of the confusing if (!msi->phys) conditional. It > looks as though this would work, but it's confusing to have that code > in a resume handler. > > It also becomes very asymmetric when you set up the MSIs in the resume > handler, but then don't call tegra_pcie_msi_disable() from the suspend > handler. > > I'd suggest just pulling out all of the allocations and such into a > separate function, perhaps tegra_pcie_msi_setup(), and similarily split > off the resource part of tegra_pcie_disable_msi() into a separate > function, perhaps tegra_pcie_msi_teardown(). > > That way, suspend/resume will do only what they need (write registers) > and everything will look more symmetric again. That in turn makes the > code a lot easier to follow and maintain. I'll do this change in next version. > > Thierry > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
