Re: [PATCH V6 7/7] PCI: tegra: Add power management support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 11, 2018 at 11:38:08AM +0530, Manikanta Maddireddy wrote:
> Tegra186 powergate driver is implemented as power domain driver, power
> partition ungate/gate are registered as power_on/power_off callback
> functions. There are no direct functions to power gate/ungate host
> controller in Tegra186. Host controller driver should add "power-domains"
> property in device tree and implement runtime suspend and resume
> callback functons. Power gate and ungate is taken care by power domain
> driver when host controller driver calls pm_runtime_put_sync and
> pm_runtime_get_sync respectively.
> 
> Register suspend_noirq & resume_noirq callback functions to allow PCIe to
> come up after resume from RAM. Both runtime and noirq pm ops share same
> callback functions.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> ---
> V2:
> * no change in this patch
> V3:
> * no change in this patch
> V4:
> * no change in this patch
> V5:
> * Decoupled from https://patchwork.ozlabs.org/patch/832053/ and
> rebased on linux-next
> V6:
> * no change in this patch
> 
>  drivers/pci/host/pci-tegra.c | 181 ++++++++++++++++++++++++++-----------------
>  1 file changed, 110 insertions(+), 71 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
[...]
> @@ -1536,37 +1526,41 @@ static int tegra_pcie_enable_msi(struct tegra_pcie *pcie)
>  	int err;
>  	u32 reg;
>  
> -	mutex_init(&msi->lock);
> +	if (!msi->phys) {
> +		mutex_init(&msi->lock);
>  
> -	msi->chip.dev = dev;
> -	msi->chip.setup_irq = tegra_msi_setup_irq;
> -	msi->chip.teardown_irq = tegra_msi_teardown_irq;
> +		msi->chip.dev = dev;
> +		msi->chip.setup_irq = tegra_msi_setup_irq;
> +		msi->chip.teardown_irq = tegra_msi_teardown_irq;
>  
> -	msi->domain = irq_domain_add_linear(dev->of_node, INT_PCI_MSI_NR,
> -					    &msi_domain_ops, &msi->chip);
> -	if (!msi->domain) {
> -		dev_err(dev, "failed to create IRQ domain\n");
> -		return -ENOMEM;
> -	}
> +		msi->domain = irq_domain_add_linear(dev->of_node,
> +						    INT_PCI_MSI_NR,
> +						    &msi_domain_ops,
> +						    &msi->chip);
> +		if (!msi->domain) {
> +			dev_err(dev, "failed to create IRQ domain\n");
> +			return -ENOMEM;
> +		}
>  
> -	err = platform_get_irq_byname(pdev, "msi");
> -	if (err < 0) {
> -		dev_err(dev, "failed to get IRQ: %d\n", err);
> -		goto err;
> -	}
> +		err = platform_get_irq_byname(pdev, "msi");
> +		if (err < 0) {
> +			dev_err(dev, "failed to get IRQ: %d\n", err);
> +			goto err;
> +		}
>  
> -	msi->irq = err;
> +		msi->irq = err;
>  
> -	err = request_irq(msi->irq, tegra_pcie_msi_irq, IRQF_NO_THREAD,
> -			  tegra_msi_irq_chip.name, pcie);
> -	if (err < 0) {
> -		dev_err(dev, "failed to request IRQ: %d\n", err);
> -		goto err;
> -	}
> +		err = request_irq(msi->irq, tegra_pcie_msi_irq, IRQF_NO_THREAD,
> +				  tegra_msi_irq_chip.name, pcie);
> +		if (err < 0) {
> +			dev_err(dev, "failed to request IRQ: %d\n", err);
> +			goto err;
> +		}
>  
> -	/* setup AFI/FPCI range */
> -	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> -	msi->phys = virt_to_phys((void *)msi->pages);
> +		/* setup AFI/FPCI range */
> +		msi->pages = __get_free_pages(GFP_KERNEL, 0);
> +		msi->phys = virt_to_phys((void *)msi->pages);
> +	}

I think it'd be better to split this off into a separate function so
that we can get rid of the confusing if (!msi->phys) conditional. It
looks as though this would work, but it's confusing to have that code
in a resume handler.

It also becomes very asymmetric when you set up the MSIs in the resume
handler, but then don't call tegra_pcie_msi_disable() from the suspend
handler.

I'd suggest just pulling out all of the allocations and such into a
separate function, perhaps tegra_pcie_msi_setup(), and similarily split
off the resource part of tegra_pcie_disable_msi() into a separate
function, perhaps tegra_pcie_msi_teardown().

That way, suspend/resume will do only what they need (write registers)
and everything will look more symmetric again. That in turn makes the
code a lot easier to follow and maintain.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux