Hi Lorenzo, Except "PCI: tegra: Move REFCLK pad settings out of phy_power_on()" all other patches in the series is new code. Thanks, Manikanta On 27-Nov-17 11:39 PM, Lorenzo Pieralisi wrote: > Hi Manikanta, > > On Sun, Nov 26, 2017 at 01:29:26AM +0530, Manikanta Maddireddy wrote: >> Hi Bjorn, Thierry, >> >> Could you please review this series of patches? > > It is new code correct (ie there are not any fixes in the series) ? > I will mark it as code to review for the next kernel cycle on my side. > > Thanks, > Lorenzo > >> On 30-Oct-17 7:27 PM, Manikanta Maddireddy wrote: >>> These series of patches does the following things, >>> - Deasserting pcie_xrst after programming root port to make sure that >>> register programming is reflected during LTSSM >>> - Apply REFCLK pad settings to make sure P2P amplitude requirement is met >>> - Enable Gen2 link speed >>> - Advertise AER capability >>> - Program UPHY electrical settings for meeting eye diagram requirements >>> - Bunch of SW fixups explained in their respective commit log >>> >>> Testing done on Tegra124, 210 and 186: >>> - PCIe link up, config read, BAR read and basic functionality of Ethernet >>> card >>> - Link speed switch to Gen2 after link retrain >>> - Link speed stays in Gen1 after retrain if end point is only Gen1 capable >>> - Simulated AER errors and verified dmesg logs for them >>> - Rest of the programming is verified by dumping the registers after PCIe >>> link up >>> >>> Manikanta Maddireddy (12): >>> PCI: tegra: Start LTSSM after programming root port >>> PCI: tegra: Move REFCLK pad settings out of phy_power_on() >>> PCI: tegra: Retrain link for Gen2 speed >>> PCI: tegra: Advertise AER capability >>> PCI: tegra: Program UPHY electrical settings in Tegra210 >>> PCI: tegra: Enable opportunistic update FC and ACK >>> PCI: tegra: Disable AFI dynamic clock gating >>> PCI: tegra: Wait for DLLP to finish before entering L1 or L2 >>> PCI: tegra: Enable PCIe xclk clock clamping >>> PCI: tegra: Add SW fixup for RAW violations >>> PCI: tegra: Increase the deskew retry time >>> PCI: tegra: Update flow control threshold in Tegra210 >>> >>> drivers/pci/host/pci-tegra.c | 306 ++++++++++++++++++++++++++++++++++++++++--- >>> 1 file changed, 288 insertions(+), 18 deletions(-) >>> -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
