Re: [PATCH V3 00/12] Enable Tegra root port features and apply SW fixups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Manikanta,

On Sun, Nov 26, 2017 at 01:29:26AM +0530, Manikanta Maddireddy wrote:
> Hi Bjorn, Thierry,
> 
> Could you please review this series of patches?

It is new code correct (ie there are not any fixes in the series) ?
I will mark it as code to review for the next kernel cycle on my side.

Thanks,
Lorenzo

> On 30-Oct-17 7:27 PM, Manikanta Maddireddy wrote:
> > These series of patches does the following things,
> > - Deasserting pcie_xrst after programming root port to make sure that
> >   register programming is reflected during LTSSM
> > - Apply REFCLK pad settings to make sure P2P amplitude requirement is met
> > - Enable Gen2 link speed
> > - Advertise AER capability
> > - Program UPHY electrical settings for meeting eye diagram requirements
> > - Bunch of SW fixups explained in their respective commit log
> > 
> > Testing done on Tegra124, 210 and 186:
> > - PCIe link up, config read, BAR read and basic functionality of Ethernet
> >   card
> > - Link speed switch to Gen2 after link retrain
> > - Link speed stays in Gen1 after retrain if end point is only Gen1 capable
> > - Simulated AER errors and verified dmesg logs for them
> > - Rest of the programming is verified by dumping the registers after PCIe
> > link up
> > 
> > Manikanta Maddireddy (12):
> >   PCI: tegra: Start LTSSM after programming root port
> >   PCI: tegra: Move REFCLK pad settings out of phy_power_on()
> >   PCI: tegra: Retrain link for Gen2 speed
> >   PCI: tegra: Advertise AER capability
> >   PCI: tegra: Program UPHY electrical settings in Tegra210
> >   PCI: tegra: Enable opportunistic update FC and ACK
> >   PCI: tegra: Disable AFI dynamic clock gating
> >   PCI: tegra: Wait for DLLP to finish before entering L1 or L2
> >   PCI: tegra: Enable PCIe xclk clock clamping
> >   PCI: tegra: Add SW fixup for RAW violations
> >   PCI: tegra: Increase the deskew retry time
> >   PCI: tegra: Update flow control threshold in Tegra210
> > 
> >  drivers/pci/host/pci-tegra.c | 306 ++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 288 insertions(+), 18 deletions(-)
> > 
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux