On March 30, 2017 8:15:29 AM CEST, Vignesh R <vigneshr@xxxxxx> wrote: >Hi, > >On Thursday 30 March 2017 12:14 AM, Olliver Schinagl wrote: >> diff --git a/include/uapi/linux/serial_reg.h >b/include/uapi/linux/serial_reg.h >> index 5db76880b4ad..489522389a10 100644 >> --- a/include/uapi/linux/serial_reg.h >> +++ b/include/uapi/linux/serial_reg.h >> @@ -31,18 +31,18 @@ >> #define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ >> >> #define UART_IIR 2 /* In: Interrupt ID Register */ >> -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ >> -#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ >> #define UART_IIR_MSI 0x00 /* Modem status interrupt */ >> +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ >> #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ >> #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ >> #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ >> - >> #define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ >> +#define UART_IIR_RX_TIMEOUT 0x0c /* DesignWare RX Timeout interrupt >*/ It was moved due to sorting. The comment could be changed maybe? I renamed it from omap to dw as i believe the omap also uses the dw ip. But i think it is a defacto standard mapping of the irr register? >> +#define UART_IIR_MASK 0x0f /* DesignWare IIR mask */ >> >> -#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ > >You are removing UART_IIR_RX_TIMEOUT? Is this intended? > >> #define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ >> #define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ >> +#define UART_IIR_EXT_MASK 0x30 /* OMAP extended IIR mask */ -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
