Hi, On Thursday 30 March 2017 12:14 AM, Olliver Schinagl wrote: > diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h > index 5db76880b4ad..489522389a10 100644 > --- a/include/uapi/linux/serial_reg.h > +++ b/include/uapi/linux/serial_reg.h > @@ -31,18 +31,18 @@ > #define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ > > #define UART_IIR 2 /* In: Interrupt ID Register */ > -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ > -#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ > #define UART_IIR_MSI 0x00 /* Modem status interrupt */ > +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ > #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ > #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ > #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ > - > #define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ > +#define UART_IIR_RX_TIMEOUT 0x0c /* DesignWare RX Timeout interrupt */ > +#define UART_IIR_MASK 0x0f /* DesignWare IIR mask */ > > -#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ You are removing UART_IIR_RX_TIMEOUT? Is this intended? > #define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ > #define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ > +#define UART_IIR_EXT_MASK 0x30 /* OMAP extended IIR mask */ -- Regards Vignesh -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
