Hi Mikko, thank you for your help. I've downloaded the xusb.bin from 2017-01-02 17:48 GMT+01:00 Mikko Perttunen <cyndis@xxxxxxxx>: > The reason would likely be that the onboard Ethernet is a USB RTL8152 which > does not seem to be compiled in. Additionally you may need to ensure the > XUSB controller firmware (firmware/nvidia/tegra210/xusb.bin) is available > during boot, either on an initrd or built-in to the kernel. I agree that > this should be documented. > > > On 01/02/2017 05:50 PM, Claudio Scordino wrote: >> >> Dear guys, >> >> just to let you know that trying the instructions at >> http://elinux.org/Jetson/TX1_Upstream_Kernel with a TX1 board and a >> 4.9 kernel, the Ethernet interface doesn't start. >> >> The console complains saying "RTNETLink Network unreachable" and >> ifconfig only shows the loopback interface. >> >> Attached the .config file. >> >> Once found the reason (I still have to investigate but you may already >> know), you may want to update the page with further instructions. >> >> Best regards and wishes for 2017. >> >> Claudio >> > > Happy new year, > Mikko. -- Claudio Scordino, Ph.D. Project Manager - Funded research projects Evidence Srl Via Carducci 56 56010 S.Giuliano Terme - Pisa - Italy Phone: +39 050 99 11 224 Mobile: + 39 393 811 7491 Fax: +39 050 99 10 812 http://www.evidence.eu.com -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
