Re: [RFC 3/6] dt/bindings: Add bindings for Tegra20/30 NOR bus driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/07/16 20:28, Mirza Krak wrote:
> 2016-07-20 14:44 GMT+02:00 Rob Herring <robh@xxxxxxxxxx>:
>> On Tue, Jul 19, 2016 at 03:36:34PM +0200, Mirza Krak wrote:
>>> From: Mirza Krak <mirza.krak@xxxxxxxxx>
>>>
>>> Document the devicetree bindings for NOR bus driver found on Tegra20 and
>>> Tegra30 SOCs
>>>
>>> Signed-off-by: Mirza Krak <mirza.krak@xxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/bus/nvidia,tegra20-nor.txt | 73 ++++++++++++++++++++++
>>>  1 file changed, 73 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt
>>> new file mode 100644
>>> index 0000000..9ee4a66
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt
>>> @@ -0,0 +1,73 @@
>>> +Device tree bindings for NVIDIA Tegra20/30 NOR Bus
>>> +
>>> +The NOR controller supports a number of memory types, including synchronous NOR,
>>> +asynchronous NOR, and other flash memories with similar interfaces, such as
>>> +MuxOneNAND. One could also connect high speed devices like FPGAs, DSPs,
>>> +CAN chips, Wi-Fi chips etc.
>>> +
>>> +The actual devices are instantiated from the child nodes of a NOR node.
>>> +
>>> +Required properties:
>>> +
>>> + - compatible: should be "nvidia,tegra20-nor", "nvidia,tegra30-nor"
>>> + - reg: Should contain NOR controller registers location and length.
>>> + - clocks: Must contain one entry, for the module clock.
>>> +   See ../clocks/clock-bindings.txt for details.
>>> + - resets : Must contain an entry for each entry in reset-names.
>>> +   See ../reset/reset.txt for details.
>>> + - reset-names : Must include the following entries:
>>> +  - nor
>>> + - #address-cells: Must be set to 2 to allow memory address translation
>>> + - #size-cells:      Must be set to 1 to allow CS address passing
>>> + - ranges: Must be set up to reflect the memory layout with four integer
>>> +             values for each chip-select line in use.
>>> + - nvidia,config: This property represents the SNOR_CONFIG_0 register.
>>> +
>>> +Note that the NOR controller does not have any internal chip-select address
>>> +decoding and if you want to access multiple devices external chip-select
>>> +decoding must be provided.
>>
>> Then what are the 2 chip selects in ranges?
>>
>> Rob
> 
> Those two chip selects are actually a representation of a external
> decoding logic based on what we use on our board. Even though it the
> NOR controller only supports one single chip select I wanted to give
> an example on how one could create more chip-selects with an external
> logic and what it would look like in the device tree representation.

Technically, the GMI/SNOR controller supports 8 chip-selects, however,
unlike some devices, it appears that software has to select the active
chip-select. Although this sounds odd, I believe that the idea is that
in order to support devices greater than 256MB (external address space
for available NOR/async devices) you can use the chip-selects to page
through memory greater than this 256MB range. At least that it my
(limited) understanding!

Cheers
Jon

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux