On Tue, Jul 19, 2016 at 03:36:34PM +0200, Mirza Krak wrote: > From: Mirza Krak <mirza.krak@xxxxxxxxx> > > Document the devicetree bindings for NOR bus driver found on Tegra20 and > Tegra30 SOCs > > Signed-off-by: Mirza Krak <mirza.krak@xxxxxxxxx> > --- > .../devicetree/bindings/bus/nvidia,tegra20-nor.txt | 73 ++++++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt > > diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt > new file mode 100644 > index 0000000..9ee4a66 > --- /dev/null > +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-nor.txt > @@ -0,0 +1,73 @@ > +Device tree bindings for NVIDIA Tegra20/30 NOR Bus > + > +The NOR controller supports a number of memory types, including synchronous NOR, > +asynchronous NOR, and other flash memories with similar interfaces, such as > +MuxOneNAND. One could also connect high speed devices like FPGAs, DSPs, > +CAN chips, Wi-Fi chips etc. > + > +The actual devices are instantiated from the child nodes of a NOR node. > + > +Required properties: > + > + - compatible: should be "nvidia,tegra20-nor", "nvidia,tegra30-nor" > + - reg: Should contain NOR controller registers location and length. > + - clocks: Must contain one entry, for the module clock. > + See ../clocks/clock-bindings.txt for details. > + - resets : Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > + - reset-names : Must include the following entries: > + - nor > + - #address-cells: Must be set to 2 to allow memory address translation > + - #size-cells: Must be set to 1 to allow CS address passing > + - ranges: Must be set up to reflect the memory layout with four integer > + values for each chip-select line in use. > + - nvidia,config: This property represents the SNOR_CONFIG_0 register. > + > +Note that the NOR controller does not have any internal chip-select address > +decoding and if you want to access multiple devices external chip-select > +decoding must be provided. Then what are the 2 chip selects in ranges? Rob -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
