On 22/04/16 10:57, Marc Zyngier wrote:
> On 20/04/16 12:03, Jon Hunter wrote:
>> Add a driver for the Tegra-AGIC interrupt controller which is compatible
>> with the ARM GIC-400 interrupt controller.
>>
>> The Tegra AGIC (Audio GIC) is part of the Audio Processing Engine (APE) on
>> Tegra210 and can route interrupts to either the GIC for the CPU subsystem
>> or the Audio DSP (ADSP) within the APE. The AGIC uses CPU interface 0 to
>> route interrupts to the CPU GIC and CPU interface 1 to route interrupts to
>> the ADSP.
>>
>> The APE is located within its own power domain on the chip and so the
>> AGIC needs to manage both the power domain and its clocks. Commit
>> afbbd2338176 ("irqchip/gic: Document optional Clock and Power Domain
>> properties") has already added clock and power-domain properties to the
>> GIC binding and so we can make use of these for the AGIC.
>>
>> With the AGIC being located in a different power domain to the main CPU
>> cluster this means that:
>> 1. The interrupt controller cannot be registered via IRQCHIP_DECLARE()
>> because it needs to be registered as a platform device so that the
>> generic PM domain core will ensure that the power domain is available
>> before probing.
>> 2. The interrupt controller cannot be suspended/restored based upon
>> changes in the CPU power state and needs to use runtime-pm instead.
>>
>> The GIC platform driver has been implemented by making the following
>> changes to the core GIC driver:
>> 1. Remove the dependency on CONFIG_CPU_PM from PM specific variables and
>> functions so that they can be used by the platform driver even when
>> CONFIG_CPU_PM is not selected.
>> 2. Move the code that maps the GIC registers and parses the device-tree
>> blob into a new function called gic_of_setup() that can be used by
>> both the platform driver as well as the existing driver.
>> 3. Add and register platform driver for the GIC. The platform driver
>> uses the PM_CLK framework for managing the clocks used by the GIC
>> and so select CONFIG_PM_CLK.
>>
>> Finally, a couple other notes on the implementation are:
>> 1. Currently the GIC platform driver only supports non-root GICs and
>> assumes that the GIC has a parent interrupt. It is assumed that
>> root interrupt controllers need to be initialised early.
>> 2. There is no specific suspend handling for GICs registered as platform
>> devices. Non-wakeup interrupts will be disabled by the kernel during
>> late suspend, however, this alone will not power down the GIC if
>> interrupts have been requested and not freed. Therefore, requestors
>> of non-wakeup interrupts will need to free them on entering suspend
>> in order to power-down the GIC.
>>
>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
>> ---
>>
>> Please note that so far I have not added all the clock names for the
>> various GIC versions (as described by the DT documentation). I thought
>> we could add these as they are needed.
>
> So while the code looks OK, I'd like to stop adding more code to this
> poor GIC driver, because it is starting to look like a huge mess.
Agree.
> What is preventing us to move this to a separate irq-gic-pm.c file?
Absolutely nothing. Once we sort out the clocking, I will do that.
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
