The Tegra210 AGIC interrupt controller is a 2nd level interrupt controller located in a separate power domain to the main GIC interrupt controller. It can route interrupts to the main CPU cluster or an Audio DSP slave. This series only support routing interrupts to the main CPU cluster. Ideally we would like to re-use the existing ARM GIC driver because the AGIC is a GIC-400. However, in order to do so this requires adding runtime power management support for irqchips and several significant changes to the exisiting GIC driver for power management reasons. Changes since V1: - Updated GIC to only WARN and not return an error if configuring a PPI fails but will still return an error if an SPI fails (per discussion with Marc). - Dropped change to mask sense bits for GIC-v3 (as this is not necessary) - Split patch to avoid setting interrupt type when mapping the IRQ into two patches per TGLX's feedback. - Changed name of irqchip device structure to "parent_device" - Moved call to irq_chip_pm_get() outside of chip_bus_lock(). - Dropped patch to remove clock names from GIC DT documentation and added AGIC clock names. - Update GIC platform driver to look-up clocks names from static list. Jon Hunter (14): irqchip/gic: Don't unnecessarily write the IRQ configuration irqchip/gic: WARN if setting the interrupt type for a PPI fails irqchip: Mask the non-type/sense bits when translating an IRQ irqdomain: Fix handling of type settings for existing mappings genirq: Look-up trigger type if not specified by caller irqdomain: Don't set type when mapping an IRQ genirq: Add runtime power management support for IRQ chips irqchip/gic: Don't initialise chip if mapping IO space fails irqchip/gic: Remove static irq_chip definition for eoimode1 irqchip/gic: Return an error if GIC initialisation fails irqchip/gic: Pass GIC pointer to save/restore functions irqchip/gic: Prepare for adding platform driver dt-bindings: arm-gic: Add documentation for Tegra210 AGIC irqchip/gic: Add support for tegra AGIC interrupt controller .../bindings/interrupt-controller/arm,gic.txt | 2 + drivers/irqchip/Kconfig | 1 + drivers/irqchip/irq-crossbar.c | 2 +- drivers/irqchip/irq-gic-common.c | 19 +- drivers/irqchip/irq-gic.c | 440 ++++++++++++++++----- drivers/irqchip/irq-tegra.c | 2 +- include/linux/irq.h | 4 + include/linux/irqdomain.h | 3 + kernel/irq/chip.c | 35 ++ kernel/irq/internals.h | 1 + kernel/irq/irqdomain.c | 55 ++- kernel/irq/manage.c | 40 +- 12 files changed, 481 insertions(+), 123 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
