The Tegra210 AGIC interrupt controller is a 2nd level interrupt controller located in a separate power domain to the main GIC interrupt controller. It can route interrupts to the main CPU cluster or an Audio DSP slave. This series only support routing interrupts to the main CPU cluster. Ideally we would like to re-use the existing ARM GIC driver because the AGIC is a GIC-400. However, in order to do so this requires adding runtime power management support for irqchips and several significant changes to the exisiting GIC driver for power management reasons. Originally, this series was sent out as an RFC [0] and hopefully, I have addressed all the comments and issues reported. I was/am tempted to split this series into two series, one to add runtime-pm support for irqchips (patches 1-8) and one to add support for the AGIC to the GIC driver (patches 9-15). If this would be more manageable and easier, I am happy to do so. I have included a fix for OMAP (needs testing) that was reported by Grygorii. I know it may seem odd to include in a series adding an interrupt controller for Tegra, but oh well ... This is work well so far on Tegra, but would love to get some more testing on other platforms. [0] http://marc.info/?l=linux-kernel&m=145034948920651&w=2 Jon Hunter (15): ARM: tegra: Correct interrupt type for ARM TWD ARM: OMAP: Correct interrupt type for ARM TWD irqchip/gic: Don't unnecessarily write the IRQ configuration irqchip/gic: WARN if setting the interrupt type fails irqchip: Mask the non-type/sense bits when translating an IRQ irqdomain: Ensure type settings match for an existing mapping irqdomain: Don't set type when mapping an IRQ genirq: Add runtime power management support for IRQ chips irqchip/gic: Don't initialise chip if mapping IO space fails irqchip/gic: Remove static irq_chip definition for eoimode1 irqchip/gic: Return an error if GIC initialisation fails irqchip/gic: Pass GIC pointer to save/restore functions irqchip/gic: Prepare for adding platform driver dt-bindings: arm-gic: Drop 'clock-names' from binding document irqchip/gic: Add support for tegra AGIC interrupt controller .../bindings/interrupt-controller/arm,gic.txt | 12 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/tegra20.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 2 +- drivers/irqchip/Kconfig | 1 + drivers/irqchip/irq-crossbar.c | 2 +- drivers/irqchip/irq-gic-common.c | 19 +- drivers/irqchip/irq-gic-common.h | 2 +- drivers/irqchip/irq-gic-v3.c | 6 +- drivers/irqchip/irq-gic.c | 437 ++++++++++++++++----- drivers/irqchip/irq-hip04.c | 5 +- drivers/irqchip/irq-tegra.c | 2 +- include/linux/irq.h | 5 + include/linux/irqdomain.h | 3 + kernel/irq/chip.c | 52 +++ kernel/irq/internals.h | 1 + kernel/irq/irqdomain.c | 77 +++- kernel/irq/manage.c | 21 +- kernel/irq/pm.c | 3 + 19 files changed, 492 insertions(+), 162 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
