The ARM TWD interrupt is a private peripheral interrupt (PPI) and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For OMAP4 devices the PPI type cannot be set and so when we attempt to set the type for the ARM TWD interrupt it fails. This has done unnoticed because it fails silently and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Reported-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> --- Tony, Grygorii, Please note that I have not tested this. Can you test this series and see if you see any warnings on OMAP4? I am guessing that the configuration should be LEVEL and not EDGE. This was reported here: http://marc.info/?l=linux-tegra&m=145078316419821&w=2 arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2bd9c83300b2..421fe9f8a9eb 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -70,7 +70,7 @@ compatible = "arm,cortex-a9-twd-timer"; clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>; interrupt-parent = <&gic>; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
