On 11/09/15 14:21, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Fri, Sep 11, 2015 at 02:15:00PM +0100, Jon Hunter wrote: >> >> On 11/09/15 13:38, Thierry Reding wrote: >>>> Old Signed by an unknown key >>> >>> On Fri, Sep 11, 2015 at 11:39:01AM +0100, Jon Hunter wrote: >>>> Hi Kevin, >>>> >>>> On 10/09/15 22:29, Kevin Hilman wrote: >>>> >>>> [snip] >>>> >>>>> Since there is no movement on this, and jetson hasn't been boot for >>>>> multi_v7_defconfig for a while[1], I think it's time to undo the >>>>> option causing this problem[2] so that v4.3 will actually boot on the >>>>> jetson. >>>>> >>>>> Unless I hear a good reason otherwise, I'll be posting a patch to >>>>> disable the HDA related options in multi_v7_defconfig. >>>> >>>> So curiosity got the better of this cat, as to why we are not seeing >>>> this ;-) >>>> >>>> The main difference I see between the tegra_defconfig and >>>> multi_v7_defconfig is all the sound drivers are modules (including >>>> this one). >>>> >>>> So trying a quick modprobe of the hda-tegra driver I do see it hang ... >>>> >>>> / # modprobe snd-hda-tegra >>>> [ 625.213864] snd_hda_tegra: Unknown symbol azx_probe_codecs (err 0) >>>> [ 625.220215] snd_hda_tegra: Unknown symbol azx_init_streams (err 0) >>>> [ 625.226480] snd_hda_tegra: Unknown symbol azx_stop_all_streams (err 0) >>>> [ 625.233168] snd_hda_tegra: Unknown symbol azx_bus_init (err 0) >>>> [ 625.239062] snd_hda_tegra: Unknown symbol azx_free_streams (err 0) >>>> [ 625.245314] snd_hda_tegra: Unknown symbol azx_init_chip (err 0) >>>> [ 625.251321] snd_hda_tegra: Unknown symbol snd_hda_set_power_save (err 0) >>>> [ 625.258081] snd_hda_tegra: Unknown symbol azx_stop_chip (err 0) >>>> [ 625.264078] snd_hda_tegra: Unknown symbol azx_codec_configure (err 0) >>>> [ 625.270607] snd_hda_tegra: Unknown symbol azx_interrupt (err 0) >>>> [ 840.117528] INFO: task modprobe:137 blocked for more than 120 seconds. >>>> [ 840.124192] Not tainted 4.2.0-next-20150909-40826-gb799053 #1 >>>> [ 840.130584] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >>>> [ 840.138540] modprobe D c09ac3a4 0 137 82 0x00000000 >>>> [ 840.145123] [<c09ac3a4>] (__schedule) from [<c09ac838>] (schedule+0x34/0x98) >>>> [ 840.152310] [<c09ac838>] (schedule) from [<c09acaac>] (schedule_preempt_disabled+0xc/0x10) >>>> [ 840.160734] [<c09acaac>] (schedule_preempt_disabled) from [<c09adeec>] (__mutex_lock_slowpath+0x9c/0x150) >>>> [ 840.170458] [<c09adeec>] (__mutex_lock_slowpath) from [<c09adfec>] (mutex_lock+0x4c/0x50) >>>> [ 840.178807] [<c09adfec>] (mutex_lock) from [<c062999c>] (__driver_attach+0x44/0x90) >>>> [ 840.186627] [<c062999c>] (__driver_attach) from [<c0627fcc>] (bus_for_each_dev+0x54/0x88) >>>> [ 840.194966] [<c0627fcc>] (bus_for_each_dev) from [<c0628f88>] (bus_add_driver+0xe4/0x1f0) >>>> [ 840.203305] [<c0628f88>] (bus_add_driver) from [<c062a1d0>] (driver_register+0x78/0xf4) >>>> [ 840.211475] [<c062a1d0>] (driver_register) from [<c020ac04>] (do_one_initcall+0x80/0x1d0) >>>> [ 840.219818] [<c020ac04>] (do_one_initcall) from [<c02c8abc>] (do_init_module+0x58/0x354) >>>> [ 840.228081] [<c02c8abc>] (do_init_module) from [<c02afae8>] (load_module+0x17e0/0x1d8c) >>>> [ 840.236258] [<c02afae8>] (load_module) from [<c02b016c>] (SyS_init_module+0xd8/0x138) >>>> [ 840.244260] [<c02b016c>] (SyS_init_module) from [<c0210b00>] (ret_fast_syscall+0x0/0x3c) >>>> >>>> Adding some debug it appears to hang on snd-hda-codec-hdmi (the following show >>>> the order in which modules are being loaded) ... >>>> >>>> / # modprobe snd-hda-tegra >>>> [ 22.450276] snd_hda_tegra: err = -2 >>>> [ 22.484535] soundcore: err = 0 >>>> [ 22.488964] snd: err = 0 >>>> [ 22.493242] snd_timer: err = 0 >>>> [ 22.498380] snd_pcm: err = 0 >>>> [ 22.502479] snd_hda_core: err = 0 >>>> [ 22.508337] snd_hda_codec: err = 0 >>>> [ 22.513386] snd_hda_tegra: err = 0 >>>> [ 22.740216] snd_hda_codec_hdmi: err = 0 >>>> >>>> [hangs here] >>>> >>>> However, if I do the following, this works ... >>>> >>>> / # modprobe snd-hda-codec-hdmi >>>> / # modprobe snd-hda-tegra >>>> >>>> So it implies that snd-hda-codec-hdmi needs to be loaded first otherwise it hangs. >>>> >>>> Thierry, any thoughts? >>> >>> I can't reproduce this. Booting multi_v7_defconfig on my setup works >>> just fine. I don't ever see snd-hda-codec-hdmi being probed, but then >>> probing it manually works fine. No hangs. >> >> To be clear, booting multi_v7_defconfig works just fine for me too and >> has been working fine for months. However, the reason I am not seeing >> the issue Kevin and Tyler are reporting is because I never attempt to >> "modprobe snd-hda-tegra" after boot. If I do then I see a hang. So I >> believe the only reason we don't see this is because their setup is >> loading modules. > > snd-hda-tegra is auto-loaded on boot for me as well and I don't see any > hangs either. I can also unload and reload the module just fine. I've > tested this on next-20150911. What else are you auto-loading? For my testing there appears to be a sensitivity to order outside of the depmod order. Can you try unloading all the sound modules and then do a "modprobe snd-hda-tegra"? Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
