On Fri, Sep 11, 2015 at 02:10:59PM +0100, Jon Hunter wrote: > > On 11/09/15 13:38, Thierry Reding wrote: > > * PGP Signed by an unknown key > > > > On Fri, Sep 11, 2015 at 11:39:01AM +0100, Jon Hunter wrote: > >> Hi Kevin, > >> > >> On 10/09/15 22:29, Kevin Hilman wrote: > >> > >> [snip] > >> > >>> Since there is no movement on this, and jetson hasn't been boot for > >>> multi_v7_defconfig for a while[1], I think it's time to undo the > >>> option causing this problem[2] so that v4.3 will actually boot on the > >>> jetson. > >>> > >>> Unless I hear a good reason otherwise, I'll be posting a patch to > >>> disable the HDA related options in multi_v7_defconfig. > >> > >> So curiosity got the better of this cat, as to why we are not seeing > >> this ;-) > >> > >> The main difference I see between the tegra_defconfig and > >> multi_v7_defconfig is all the sound drivers are modules (including > >> this one). > >> > >> So trying a quick modprobe of the hda-tegra driver I do see it hang ... > >> > >> / # modprobe snd-hda-tegra > >> [ 625.213864] snd_hda_tegra: Unknown symbol azx_probe_codecs (err 0) > >> [ 625.220215] snd_hda_tegra: Unknown symbol azx_init_streams (err 0) > >> [ 625.226480] snd_hda_tegra: Unknown symbol azx_stop_all_streams (err 0) > >> [ 625.233168] snd_hda_tegra: Unknown symbol azx_bus_init (err 0) > >> [ 625.239062] snd_hda_tegra: Unknown symbol azx_free_streams (err 0) > >> [ 625.245314] snd_hda_tegra: Unknown symbol azx_init_chip (err 0) > >> [ 625.251321] snd_hda_tegra: Unknown symbol snd_hda_set_power_save (err 0) > >> [ 625.258081] snd_hda_tegra: Unknown symbol azx_stop_chip (err 0) > >> [ 625.264078] snd_hda_tegra: Unknown symbol azx_codec_configure (err 0) > >> [ 625.270607] snd_hda_tegra: Unknown symbol azx_interrupt (err 0) > >> [ 840.117528] INFO: task modprobe:137 blocked for more than 120 seconds. > >> [ 840.124192] Not tainted 4.2.0-next-20150909-40826-gb799053 #1 > >> [ 840.130584] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > >> [ 840.138540] modprobe D c09ac3a4 0 137 82 0x00000000 > >> [ 840.145123] [<c09ac3a4>] (__schedule) from [<c09ac838>] (schedule+0x34/0x98) > >> [ 840.152310] [<c09ac838>] (schedule) from [<c09acaac>] (schedule_preempt_disabled+0xc/0x10) > >> [ 840.160734] [<c09acaac>] (schedule_preempt_disabled) from [<c09adeec>] (__mutex_lock_slowpath+0x9c/0x150) > >> [ 840.170458] [<c09adeec>] (__mutex_lock_slowpath) from [<c09adfec>] (mutex_lock+0x4c/0x50) > >> [ 840.178807] [<c09adfec>] (mutex_lock) from [<c062999c>] (__driver_attach+0x44/0x90) > >> [ 840.186627] [<c062999c>] (__driver_attach) from [<c0627fcc>] (bus_for_each_dev+0x54/0x88) > >> [ 840.194966] [<c0627fcc>] (bus_for_each_dev) from [<c0628f88>] (bus_add_driver+0xe4/0x1f0) > >> [ 840.203305] [<c0628f88>] (bus_add_driver) from [<c062a1d0>] (driver_register+0x78/0xf4) > >> [ 840.211475] [<c062a1d0>] (driver_register) from [<c020ac04>] (do_one_initcall+0x80/0x1d0) > >> [ 840.219818] [<c020ac04>] (do_one_initcall) from [<c02c8abc>] (do_init_module+0x58/0x354) > >> [ 840.228081] [<c02c8abc>] (do_init_module) from [<c02afae8>] (load_module+0x17e0/0x1d8c) > >> [ 840.236258] [<c02afae8>] (load_module) from [<c02b016c>] (SyS_init_module+0xd8/0x138) > >> [ 840.244260] [<c02b016c>] (SyS_init_module) from [<c0210b00>] (ret_fast_syscall+0x0/0x3c) > >> > >> Adding some debug it appears to hang on snd-hda-codec-hdmi (the following show > >> the order in which modules are being loaded) ... > >> > >> / # modprobe snd-hda-tegra > >> [ 22.450276] snd_hda_tegra: err = -2 > >> [ 22.484535] soundcore: err = 0 > >> [ 22.488964] snd: err = 0 > >> [ 22.493242] snd_timer: err = 0 > >> [ 22.498380] snd_pcm: err = 0 > >> [ 22.502479] snd_hda_core: err = 0 > >> [ 22.508337] snd_hda_codec: err = 0 > >> [ 22.513386] snd_hda_tegra: err = 0 > >> [ 22.740216] snd_hda_codec_hdmi: err = 0 > >> > >> [hangs here] > >> > >> However, if I do the following, this works ... > >> > >> / # modprobe snd-hda-codec-hdmi > >> / # modprobe snd-hda-tegra > >> > >> So it implies that snd-hda-codec-hdmi needs to be loaded first otherwise it hangs. > >> > >> Thierry, any thoughts? > > > > I can't reproduce this. Booting multi_v7_defconfig on my setup works > > just fine. I don't ever see snd-hda-codec-hdmi being probed, but then > > probing it manually works fine. No hangs. > > Did you try "modprobe snd-hda-tegra"? Fails for me 100% of the time. Works for me 100% of the time. Unloading and reloading isn't a problem either. What revision of the Jetson TK1 do you have? Mine is a C.2 > > What I do see is that after a little while network stops working. I > > noticed primarily because I boot with an NFS root, so the kernel started > > complaining about the NFS server not responding. Being on an NFS root > > could be one reason why this works for me, not sure what the kernelci > > labs are running. I don't see the network issues with tegra_defconfig. > > I've also tried a tegra_defconfig with all of sound support built as > > modules and that all works perfectly. > > > > I'll investigate the multi_v7_defconfig network issues, perhaps that'll > > give me some clues, or perhaps even allow me to reproduce the original > > issue. > > Well I am not using any networking and booting with a simple ramdisk so > I don't think that is the right place to look. Looks like this might have been a transient issue with my networking setup. I can no longer reproduce the NFS hangs. What sort of ramdisk do you use? Can you share the instructions you use to create it? Perhaps I can reproduce that way. Thierry
Attachment:
signature.asc
Description: PGP signature
