On Wed, May 13, 2015 at 04:57:42PM +0200, Thierry Reding wrote: > From: Thierry Reding <treding@xxxxxxxxxx> > > NVIDIA Tegra210 (also known as Tegra X1) has four Cortex-A57 and four > Cortex-A53 CPUs. Compared to Tegra124 and Tegra132 it comes with a 256- > core Maxwell GPU. It supports processing videos of up to 4K resolutions > at 60 fps (H.265, VP9, H.264). > > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> > --- > arch/arm64/Kconfig | 9 + > arch/arm64/boot/dts/nvidia/tegra210.dtsi | 998 +++++++++++++++++++++++++++++++ > 2 files changed, 1007 insertions(+) > create mode 100644 arch/arm64/boot/dts/nvidia/tegra210.dtsi > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > index 7796af4b1d6f..bfdf064ada66 100644 > --- a/arch/arm64/Kconfig > +++ b/arch/arm64/Kconfig > @@ -225,6 +225,15 @@ config ARCH_TEGRA_132_SOC > but contains an NVIDIA Denver CPU complex in place of > Tegra124's "4+1" Cortex-A15 CPU complex. > > +config ARCH_TEGRA_210_SOC > + bool "NVIDIA Tegra210 SoC" > + depends on ARCH_TEGRA > + select PINCTRL_TEGRA210 > + select USB_ULPI if USB_PHY > + select USB_ULPI_VIEWPORT if USB_PHY > + help > + Enable support for the NVIDIA Tegra210 SoC. > + The previous ARCH_TEGRA_132_SOC escaped me. Do we need all these ARCH_TEGRA_*_SOC entries? Can we not have per-driver Kconfig options? For example, ARCH_TEGRA_132_SOC seems to be only used in drivers/clk/tegra, a specific Kconfig entry in there would suffice. -- Catalin -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
