On Thu, Oct 30, 2014 at 6:45 AM, Thierry Reding
<thierry.reding@xxxxxxxxx> wrote:
> On Wed, Oct 29, 2014 at 12:43:36PM -0700, Andrew Bresticker wrote:
>> >> diff --git a/drivers/pinctrl/pinctrl-tegra-xusb.c b/drivers/pinctrl/pinctrl-tegra-xusb.c
> [...]
>> >> +
>> >> + for (i = 0; i < TEGRA_XUSB_USB3_PHYS; i++) {
>> >> + if (phy == padctl->phys[TEGRA_XUSB_PADCTL_USB3_P0 + i])
>> >> + break;
>> >
>> > You could simply return i here and then BUG_ON unconditionally.
>> >
>> >> + }
>> >> + BUG_ON(i == TEGRA_XUSB_USB3_PHYS);
>> >> +
>> >> + return i;
>> >> +}
>> >
>> > Actually, thinking about it some more, perhaps making this a WARN_ON()
>> > and returning an error so that we can continue and propagate the error
>> > would be more useful. BUG_ON() will completely hang the kernel with no
>> > way out but rebooting. WARN_ON() will give a hint about something being
>> > wrong and returning an error will allow the kernel to continue to run,
>> > which might be the only way to diagnose and fix the problem, even if it
>> > means that USB 3.0 support will be disabled.
>>
>> I felt like BUG_ON is more appropriate here. Hitting this case means
>> there's a bug in the PHY core or a driver has passed a bogus pointer
>> and the stack dump produced by the BUG_ON should make it obvious as to
>> what the issue is. I don't feel too strongly about it though.
>
> The problem with BUG_ON() is that you won't be able to go any further.
> So if this were to happen on a device with no serial you might not even
> get to a point where you actually see an error message. Handling this
> more gracefully by propagating the error code and failing .probe() does
> not seem overly complicated and the WARN_ON() output will hopefully
> still be noticed (it probably will be after the user can't get USB to
> work).
Ok.
>> >> @@ -936,6 +2098,18 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
>> >> goto unregister;
>> >> }
>> >>
>> >> + INIT_WORK(&padctl->mbox_req_work, tegra_xusb_phy_mbox_work);
>> >> + padctl->mbox_client.dev = &pdev->dev;
>> >> + padctl->mbox_client.tx_block = true;
>> >> + padctl->mbox_client.tx_tout = 0;
>> >> + padctl->mbox_client.rx_callback = tegra_xusb_phy_mbox_rx;
>> >> + padctl->mbox_chan = mbox_request_channel(&padctl->mbox_client, 0);
>> >> + if (IS_ERR(padctl->mbox_chan)) {
>> >> + err = PTR_ERR(padctl->mbox_chan);
>> >> + dev_err(&pdev->dev, "failed to request mailbox: %d\n", err);
>> >> + goto unregister;
>> >> + }
>> >
>> > I think this should be done before the registering the PHY provider so
>> > that we don't expose one (even for only a very short time) before we
>> > haven't made sure that it can be used.
>> >
>> > Also, this effectively makes the mailbox mandatory, which means that the
>> > above code is going to break on older DTBs. So I think we have no choice
>> > but to make mailbox (and hence XUSB) support optional.
>>
>> I understand the need for binding stability, but it's not like these
>> bindings have been around for very long (a release or two?) and this
>> series has existed for almost the same amount of time. Are there
>> really any DTBs out there that are going to break because of this?
>
> Every DTB created from a kernel version that has the original binding
> but not the one modified as part of this series is going to break. Last
> time I checked there weren't any exceptions to this rule. Note, though,
> that the rule is that existing functionality must not break. That is,
> SATA and PCIe should remain functional, so it should be fine if you just
> don't register any of the USB PHYs when the request for a mailbox
> channel fails. Something along these lines should do it:
>
> padctl->mbox_chan = mbox_request_channel(...);
> if (!IS_ERR(padctl->mbox_chan)) {
> err = tegra_xusb_padctl_setup_usb(...);
> ...
> }
Ok.
>> >> diff --git a/include/soc/tegra/xusb.h b/include/soc/tegra/xusb.h
>> >> index cfe211d..149434f 100644
>> >> --- a/include/soc/tegra/xusb.h
>> >> +++ b/include/soc/tegra/xusb.h
>> >> @@ -10,6 +10,13 @@
>> >> #ifndef __SOC_TEGRA_XUSB_H__
>> >> #define __SOC_TEGRA_XUSB_H__
>> >>
>> >> +#define TEGRA_XUSB_USB3_PHYS 2
>> >> +#define TEGRA_XUSB_UTMI_PHYS 3
>> >> +#define TEGRA_XUSB_HSIC_PHYS 2
>> >> +#define TEGRA_XUSB_NUM_USB_PHYS (TEGRA_XUSB_USB3_PHYS + TEGRA_XUSB_UTMI_PHYS + \
>> >> + TEGRA_XUSB_HSIC_PHYS)
>> >> +#define TEGRA_XUSB_NUM_PHYS (TEGRA_XUSB_NUM_USB_PHYS + 2) /* + SATA & PCIe */
>> >
>> > These are really XUSB pad controller specific defines, why does anyone
>> > else need to know this?
>>
>> They're not pad controller specific. They're also used in the xHCI host driver.
>
> I keep thinking that there should be a way around this. Of course if
> both the XHCI and mailbox drivers were merged, then there'd be no need
> to expose this publicly at all.
I'm not sure what you mean. They're SoC-specific constants that need
to be shared amongst multiple drivers. It would make sense to place
them in a shared header, does it not?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
