>> diff --git a/drivers/pinctrl/pinctrl-tegra-xusb.c b/drivers/pinctrl/pinctrl-tegra-xusb.c
> [...]
>> struct tegra_xusb_padctl_function {
>> const char *name;
>> const char * const *groups;
>> @@ -72,6 +222,16 @@ struct tegra_xusb_padctl_soc {
>>
>> const struct tegra_xusb_padctl_lane *lanes;
>> unsigned int num_lanes;
>> +
>> + u32 rx_wander;
>> + u32 rx_eq;
>> + u32 cdr_cntl;
>> + u32 dfe_cntl;
>> + u32 hs_slew;
>> + u32 ls_rslew[TEGRA_XUSB_UTMI_PHYS];
>> + u32 hs_discon_level;
>> + u32 spare_in;
>> + int hsic_port_offset;
>
> unsigned int? Are these values all SoC-specific or can they vary per
> board?
Yes, all the members I added to struct tegra_xusb_pactl_soc are SoC-specific.
>> +
>> + for (i = 0; i < TEGRA_XUSB_USB3_PHYS; i++) {
>> + if (phy == padctl->phys[TEGRA_XUSB_PADCTL_USB3_P0 + i])
>> + break;
>
> You could simply return i here and then BUG_ON unconditionally.
>
>> + }
>> + BUG_ON(i == TEGRA_XUSB_USB3_PHYS);
>> +
>> + return i;
>> +}
>
> Actually, thinking about it some more, perhaps making this a WARN_ON()
> and returning an error so that we can continue and propagate the error
> would be more useful. BUG_ON() will completely hang the kernel with no
> way out but rebooting. WARN_ON() will give a hint about something being
> wrong and returning an error will allow the kernel to continue to run,
> which might be the only way to diagnose and fix the problem, even if it
> means that USB 3.0 support will be disabled.
I felt like BUG_ON is more appropriate here. Hitting this case means
there's a bug in the PHY core or a driver has passed a bogus pointer
and the stack dump produced by the BUG_ON should make it obvious as to
what the issue is. I don't feel too strongly about it though.
>> + u32 value, offset;
>> +
>> + padctl->usb3_ports[port].context_saved = true;
>
> What's the purpose of saving the context here? This seems to be
> triggered by a request from XUSB, but it's then restored when the PHY is
> powered on. How does that even happen? Won't the PHY stay powered all
> the time? Or shouldn't the context be saved when powering off the PHY?
Right, context is saved when requested by the XUSB controller and
restored on power on. This is used during runtime power-gating or LP0
where the PHYs are powered off and on and this context is lost.
Neither of these are currently implemented by the host driver,
however.
As far as why the context is saved upon request and not at power off,
I'm not sure. I've observed that these messages come in when a USB3.0
device is enumerated. Perhaps the XUSB controller is doing some sort
of tuning.
>> @@ -936,6 +2098,18 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
>> goto unregister;
>> }
>>
>> + INIT_WORK(&padctl->mbox_req_work, tegra_xusb_phy_mbox_work);
>> + padctl->mbox_client.dev = &pdev->dev;
>> + padctl->mbox_client.tx_block = true;
>> + padctl->mbox_client.tx_tout = 0;
>> + padctl->mbox_client.rx_callback = tegra_xusb_phy_mbox_rx;
>> + padctl->mbox_chan = mbox_request_channel(&padctl->mbox_client, 0);
>> + if (IS_ERR(padctl->mbox_chan)) {
>> + err = PTR_ERR(padctl->mbox_chan);
>> + dev_err(&pdev->dev, "failed to request mailbox: %d\n", err);
>> + goto unregister;
>> + }
>
> I think this should be done before the registering the PHY provider so
> that we don't expose one (even for only a very short time) before we
> haven't made sure that it can be used.
>
> Also, this effectively makes the mailbox mandatory, which means that the
> above code is going to break on older DTBs. So I think we have no choice
> but to make mailbox (and hence XUSB) support optional.
I understand the need for binding stability, but it's not like these
bindings have been around for very long (a release or two?) and this
series has existed for almost the same amount of time. Are there
really any DTBs out there that are going to break because of this?
>> diff --git a/include/soc/tegra/xusb.h b/include/soc/tegra/xusb.h
>> index cfe211d..149434f 100644
>> --- a/include/soc/tegra/xusb.h
>> +++ b/include/soc/tegra/xusb.h
>> @@ -10,6 +10,13 @@
>> #ifndef __SOC_TEGRA_XUSB_H__
>> #define __SOC_TEGRA_XUSB_H__
>>
>> +#define TEGRA_XUSB_USB3_PHYS 2
>> +#define TEGRA_XUSB_UTMI_PHYS 3
>> +#define TEGRA_XUSB_HSIC_PHYS 2
>> +#define TEGRA_XUSB_NUM_USB_PHYS (TEGRA_XUSB_USB3_PHYS + TEGRA_XUSB_UTMI_PHYS + \
>> + TEGRA_XUSB_HSIC_PHYS)
>> +#define TEGRA_XUSB_NUM_PHYS (TEGRA_XUSB_NUM_USB_PHYS + 2) /* + SATA & PCIe */
>
> These are really XUSB pad controller specific defines, why does anyone
> else need to know this?
They're not pad controller specific. They're also used in the xHCI host driver.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
