Hi Sean,
On 09/19/2014 09:53 PM, Sean Paul wrote:
> Per NVidia, this clock rate should be around 70MHz in
> order to properly sample reads on data lane 0. In order
> to achieve this rate, we need to reparent the clock from
> clk_m which can only achieve 12MHz. Add parent_lp to the
> dts bindings and set the parent & rate on init.
>
> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/gpu/nvidia,tegra20-host1x.txt | 10 ++++++++--
> drivers/gpu/drm/tegra/dsi.c | 18 ++++++++++++++++++
> drivers/gpu/drm/tegra/dsi.h | 3 +++
> 3 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> index b48f4ef..fef2918 100644
> --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> @@ -191,6 +191,10 @@ of the following host1x client modules:
> - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
> - nvidia,edid: supplies a binary EDID blob
> - nvidia,panel: phandle of a display panel
> + - clock-names: Can include the following entries:
> + - lp_parent: The parent clock for lp
> + - clocks: Must contain an entry for each optional entry in clock-names.
Have you looked at assigned-clocks, assigned-clock-parents,
assigned-clock-rates common clock properties, they seems to fit to this
scenario.
Regards
Andrzej
> + See ../clocks/clock-bindings.txt for details.
>
> - sor: serial output resource
>
> @@ -360,8 +364,10 @@ Example:
> compatible = "nvidia,tegra20-dsi";
> reg = <0x54300000 0x00040000>;
> clocks = <&tegra_car TEGRA20_CLK_DSI>,
> - <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
> - clock-names = "dsi", "parent";
> + <&tegra_car TEGRA124_CLK_DSIALP>,
> + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>,
> + <&tegra_car TEGRA124_CLK_PLL_P>;
> + clock-names = "dsi", "lp", "parent", "lp_parent";
> resets = <&tegra_car 48>;
> reset-names = "dsi";
> status = "disabled";
> diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
> index f787445..c0258ae 100644
> --- a/drivers/gpu/drm/tegra/dsi.c
> +++ b/drivers/gpu/drm/tegra/dsi.c
> @@ -837,6 +837,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
> struct tegra_dsi *dsi;
> struct resource *regs;
> int err;
> + struct clk *lp_parent;
>
> dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
> if (!dsi)
> @@ -879,6 +880,23 @@ static int tegra_dsi_probe(struct platform_device *pdev)
> return PTR_ERR(dsi->clk_lp);
> }
>
> + lp_parent = devm_clk_get(&pdev->dev, "lp_parent");
> + if (!IS_ERR(lp_parent)) {
> + err = clk_set_parent(dsi->clk_lp, lp_parent);
> + if (err < 0) {
> + dev_err(&pdev->dev, "cannot set lp clock parent\n");
> + return err;
> + }
> + } else {
> + dev_info(&pdev->dev, "no lp clock parent, using hw default\n");
> + }
> +
> + err = clk_set_rate(dsi->clk_lp, DSI_LP_CLK_RATE);
> + if (err < 0) {
> + dev_err(&pdev->dev, "cannot set low-power clock rate\n");
> + return err;
> + }
> +
> err = clk_prepare_enable(dsi->clk_lp);
> if (err < 0) {
> dev_err(&pdev->dev, "cannot enable low-power clock\n");
> diff --git a/drivers/gpu/drm/tegra/dsi.h b/drivers/gpu/drm/tegra/dsi.h
> index 5ce610d..a332caf 100644
> --- a/drivers/gpu/drm/tegra/dsi.h
> +++ b/drivers/gpu/drm/tegra/dsi.h
> @@ -127,4 +127,7 @@ enum tegra_dsi_format {
> TEGRA_DSI_FORMAT_24P,
> };
>
> +/* default lp clock rate */
> +#define DSI_LP_CLK_RATE (70 * 1000 * 1000)
> +
> #endif
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
