Re: [PATCH v3 0/9] Tegra xHCI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/16/2014 10:57 AM, Andrew Bresticker wrote:
On Tue, Sep 16, 2014 at 8:26 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
On 09/15/2014 01:30 PM, Andrew Bresticker wrote:

On Mon, Sep 15, 2014 at 11:09 AM, Stephen Warren <swarren@xxxxxxxxxxxxx>
wrote:

On 09/15/2014 11:06 AM, Andrew Bresticker wrote:

On Mon, Sep 15, 2014 at 12:00 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>
wrote:

On 12 September 2014 18:37, Andrew Bresticker <abrestic@xxxxxxxxxxxx>
wrote:

On Tue, Sep 9, 2014 at 1:21 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>
wrote:

On 8 September 2014 18:22, Andrew Bresticker <abrestic@xxxxxxxxxxxx>
wrote:

On Mon, Sep 8, 2014 at 8:34 AM, Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>
wrote:

On 2 September 2014 23:34, Andrew Bresticker
<abrestic@xxxxxxxxxxxx> wrote:

Tested on Venice2, Jetson TK1, and Big with a variety of USB2.0
and
USB3.0 memory sticks and ethernet dongles using controller
firmware
recently posted by Andrew Chew [2].

...

Stephen, Thierry, have either of you had a chance to test this series?


I haven't had a chance to yet. I just went to try it out, and found that it
depends on a whole slew of other patches that I don't have. Is there a git
branch somewhere to save me having to track down all the dependencies?

Yes, Tomeu has the branch he used for testing here:
http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=3.17rc4-xhci

Hmm. That git server was quite reluctant to cough up its bits, but it did
eventually.

You'll also need the firmware Andrew Chew posted:
https://patchwork.ozlabs.org/patch/384013/

The XHCI driver can't load its firmware unless it's a module; if I make it
built-in, it fails immediately with error -2 during "Direct firmware
loading". The driver needs to work with either immediate or deferred
firmware loading.

If you want the driver to be built-in, you'll either need to build the
firmware in as well (i.e. EXTRA_FIRMWARE) or enable
FW_LOADER_USER_HELPER_FALLBACK to load with userspace/uevent (though
apparently this is deprecated).

Hmm. I didn't have to do that for the Atmel touchpad driver to work, but perhaps it's just ignoring a firmware loading error, and continuing with whatever is in the device's flash already.

It seems odd that such a fundamental feature would require a deprecated Kconfig option. Is there some replacement that does the same thing that isn't deprecated? The Kconfig help for the option doesn't say anything useful...

Oh, this option doesn't actually seem to work. I see the following in dmesg:

[root@swarren-dt ~]# dmesg|grep -i -e xhci -e firmware
[    1.461773] xhci-tegra 70090000.usb: Failed to get supply 'avddio-pex': -517
[    1.468930] platform 70090000.usb: Driver xhci-tegra requests probe deferral
[    2.567966] xhci-tegra 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2
[    2.577786] xhci-tegra 70090000.usb: Falling back to user helper

... but:

[root@swarren-dt ~]# lsusb
unable to initialize libusb: -99

Perhaps systemd-udevd doesn't implement firmware loading; is it user-space udev that's deprecated implementing user-space firmware loading, rather than the kernel deprecating support for calling out to user space?

This sucks, because now I can't just TFTP boot kernels but somehow have to get updated kernel modules onto my device every time before testing a new kernel build. That's a huge time-sink, unless I work out NFS root, which probably isn't properly or easily supported by any distro.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux