Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/07/14 11:55, Hans de Goede wrote:
Hi,

On 07/15/2014 09:12 AM, Mikko Perttunen wrote:
Heh, what you are describing is the v1 of this series :)

However,

17/06/14 Thierry Reding wrote:
I would've preferred tegra_powergate_sequence_power_up() to be used
consistently in all drivers. I'm still not convinced that using the
platform AHCI driver this way is really the best option, since we're
bending over backwards to fit into what this driver dictates. There
shouldn't be a need for that.

As you probably noticed, the issue is that on Tegra we want to use tegra_powergate_sequence_power_up to enable the SATA power rail. That function assumes that it gets a disabled clock and returns with the clock enabled. If we use ahci_platform's resource management functions,
this is not doable, since it wants to handle clocks by itself.

Right, note I was not suggesting that you use ahci_platform_enable_resources /
ahci_platform_disable_resources, that clearly won't work for your case.

As I said "I can see there are good reasons for that though."

To be honest, I too would prefer handling the resources in the driver. The driver needs other resources than what ahci_platform currently manages (at least reset_controls and multiple regulators, later we might get more) and managing them in the driver allows the driver to do proper error handling and manage all resources consistently and in one place. Also, I don't think it is sensible to add support for loading every possible kind of DT resource to ahci_platform, since most drivers won't need them.

Actually I have considered asking you to add support for reset controllers
to libahci_platform too, since I see a pattern where more and more
SOCs are starting to use those. I've refrained from asking that for now,
but once a second ahci implementation needing those pops up we will likely
go that route. So you might as well do it now :)

Other subsystems I've been in don't have this kind of helper library, so diverging here seems weird.

Well the usb uhci-platform and ehci-platform drivers are doing the same,
what we're trying to do here is avoid needless code duplication and
if possible (for ehci and uhci it currently is) make it so that adding
support for a new soc only requires adding dt stuff + a phy driver,
without touching the ?hci code at all. Again I can see that this
is not possible for the Tegra124.

That said, if you feel strongly about this, I can do what you described.

I think you can safe a nice bit of code duplication (and if we ever find
we have bugs there bug duplication) by switching to
ahci_platform_get_resources, as described in my original mail.

I can understand if you don't want to use any of the other ahci_platform_*
functions, that makes total sense.

I would not say this is something you must do, but I have a strong
preference for you taking a shot at doing this. So can you please give
this a try, and if it turns out to become ugly, just say so (with
some explanation), and then you can keep things as is.
Does that work for you?

Regards,

Hans


Sure, I'll have a go at it. I already sent one bugfix for libahci_platform anyway :)

Mikko
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux