Hi, This series adds support for the onboard AHCI-compliant Serial ATA controller found on Tegra124 systems-on-chip. The series depends on Thierry's XUSB pinctrl driver. A branch containing the series is located at git://github.com/cyndis/linux.git branch ahci-rel-v2. Mikko Perttunen (7): of: Add NVIDIA Tegra SATA controller binding ARM: tegra: Add SATA controller to Tegra124 device tree ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree clk: tegra: Enable hardware control of SATA PLL clk: tegra: Add SATA clocks to Tegra124 initialization table ata: Add support for the Tegra124 SATA controller ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig .../devicetree/bindings/ata/tegra-sata.txt | 30 ++ arch/arm/boot/dts/tegra124-jetson-tk1.dts | 35 ++ arch/arm/boot/dts/tegra124.dtsi | 25 ++ arch/arm/configs/tegra_defconfig | 3 + drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/ahci_tegra.c | 448 +++++++++++++++++++++ drivers/clk/tegra/clk-pll.c | 8 + drivers/clk/tegra/clk-tegra124.c | 2 + 9 files changed, 561 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt create mode 100644 drivers/ata/ahci_tegra.c -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
