This small series adds support for DSI continuous clock as required by the DSI specification and as needed for NVIDIA SHIELD's panel. Continuous clock mode can be specified as the flags of a DSI device, and host drivers can check this flag to adapt their behavior. The flag is then added to the panel embedded in NVIDIA SHIELD, which allows us to finally enable the panel in its device tree. Alexandre Courbot (4): drm/dsi: Add flag for continuous clock behavior drm/tegra: dsi - Handle continuous clock flag drm/panel: LG LH500WX1-SD03 uses continuous clock ARM: tegra: roth: add display DT node arch/arm/boot/dts/tegra114-roth.dts | 23 ++++++++++++++++++++--- drivers/gpu/drm/panel/panel-simple.c | 2 +- drivers/gpu/drm/tegra/dsi.c | 3 ++- include/drm/drm_mipi_dsi.h | 2 ++ 4 files changed, 25 insertions(+), 5 deletions(-) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
