On 05/20/2014 02:37 PM, Dylan Reid wrote: > On Tue, May 20, 2014 at 11:31 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote: >> On 05/20/2014 12:24 PM, Stephen Warren wrote: >>> On 05/19/2014 08:35 PM, Dylan Reid wrote: >>>> Add a device node for the HDA controller found on Tegra124. ... >> Even after fixing that, I can't play audio on Venice2: >> >> root@localhost:~# speaker-test -Dhw:0,3 -c 2 >> >> speaker-test 1.0.27.1 >> >> Playback device is hw:0,3 >> Stream parameters are 48000Hz, S16_LE, 2 channels >> Using 16 octaves of pink noise >> Rate set to 48000Hz (requested 48000Hz) >> Buffer size range from 64 to 16384 >> Period size range from 32 to 8192 >> Using max buffer size 16384 >> Periods = 4 >> was set period_size = 4096 >> was set buffer_size = 16384 >> 0 - Front Left >> Write error: -32,Broken pipe >> Write error: -32,Broken pipe >> Write error: -32,Broken pipe >> ^C 1 - Front Right >> Time per period = 1.799791 >> > > Thanks for checking Stephen. I'll fix the reset name. > > This is the state of the tree I used when I tested on Venice2 just now: > * ae57dbf - (HEAD) ARM: tegra: venice2 - Enable HDA (2 minutes ago) > * 6224524 - ARM: tegra: Add Tegra124 HDA support (2 minutes ago) > * 468ca57 - ALSA: hda - Add driver for Tegra SoC HDA (2 minutes ago) > * 928099e - ALSA: hda/hdmi - Add Nvidia Tegra124 HDMI support (2 minutes ago) > * 701eac4 - clk: tegra124: Enable hda to hdmi clocks (3 minutes ago) Ah, I was missing that clock patch. Hopefully Peter will pick it up for the Tegra clock tree soon. Now I have the same results as Thierry; speaker-test looks like it should be working, yet I don't hear any audio from the monitor. I know the monitor works, since I've used it extensively for testing GeForce GPU HDMI audio. > * 6b6ba7b - (next-20140520, linux-next/master) Add linux-next specific > files for 20140520 (11 hours ago) > > My speaker-test output is similar to yours, minus the errors, and I > hear noise from the attached monitor. > > I tried with the reset name fixed to hda2codec_2x as well and it still > works for me. > > Were you testing on one of your public trees? I couldn't get your > github tree to boot. I am using: git://github.com/swarren/linux-tegra.git tegra_dev You might also need the latest version of my github U-Boot to use my github kernel, since I fiddle with the pinmux initialization a bit: git://github.com/swarren/u-boot.git tegra_dev -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
