On Tue, May 20, 2014 at 11:31 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
> On 05/20/2014 12:24 PM, Stephen Warren wrote:
>> On 05/19/2014 08:35 PM, Dylan Reid wrote:
>>> Add a device node for the HDA controller found on Tegra124.
>>
>>> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
>>
>>> + hda@0,70030000 {
>>> + compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
>>> + reg = <0x0 0x70030000 0x0 0x10000>;
>>> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&tegra_car TEGRA124_CLK_HDA>,
>>> + <&tegra_car TEGRA124_CLK_HDA2HDMI>,
>>> + <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
>>> + clock-names = "hda", "hda2hdmi", "hdacodec_2x";
>>
>> I think that should be "hda2codec_2x". Same for the reset-names property
>> below. This fix also needs to be propagated into the DT binding
>> documentation.
>
> Even after fixing that, I can't play audio on Venice2:
>
> root@localhost:~# speaker-test -Dhw:0,3 -c 2
>
> speaker-test 1.0.27.1
>
> Playback device is hw:0,3
> Stream parameters are 48000Hz, S16_LE, 2 channels
> Using 16 octaves of pink noise
> Rate set to 48000Hz (requested 48000Hz)
> Buffer size range from 64 to 16384
> Period size range from 32 to 8192
> Using max buffer size 16384
> Periods = 4
> was set period_size = 4096
> was set buffer_size = 16384
> 0 - Front Left
> Write error: -32,Broken pipe
> Write error: -32,Broken pipe
> Write error: -32,Broken pipe
> ^C 1 - Front Right
> Time per period = 1.799791
>
Thanks for checking Stephen. I'll fix the reset name.
This is the state of the tree I used when I tested on Venice2 just now:
* ae57dbf - (HEAD) ARM: tegra: venice2 - Enable HDA (2 minutes ago)
* 6224524 - ARM: tegra: Add Tegra124 HDA support (2 minutes ago)
* 468ca57 - ALSA: hda - Add driver for Tegra SoC HDA (2 minutes ago)
* 928099e - ALSA: hda/hdmi - Add Nvidia Tegra124 HDMI support (2 minutes ago)
* 701eac4 - clk: tegra124: Enable hda to hdmi clocks (3 minutes ago)
* 6b6ba7b - (next-20140520, linux-next/master) Add linux-next specific
files for 20140520 (11 hours ago)
My speaker-test output is similar to yours, minus the errors, and I
hear noise from the attached monitor.
I tried with the reset name fixed to hda2codec_2x as well and it still
works for me.
Were you testing on one of your public trees? I couldn't get your
github tree to boot.
Dylan
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
