Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/03/2013 03:18 PM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
> 
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
> 
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.

Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
tree which doesn't include those patches?

If this does depend on patch 1/3 or 2/3... this patch feels a bit big to
apply to the MFD tree. Perhaps patch 1/3 and 2/3 could be applied alone
to a topic branch in the MFD tree so I can merge that into the Tegra
tree in order to apply this?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux