Hello.
On 08/08/2013 10:56 AM, Wei Ni wrote:
Enable thermal sensor nct1008 for t114 dalmore.
Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index b5a42f0..9d4d2b2 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -738,6 +738,14 @@
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
+
+ nct1008 {
ePAPR [1] says: "the name of a node should be somewhat generic, reflecting
the function of the device and not its precise programming model". So I
suggest "thermal"
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vdd-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
};
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
