On 07/31/2013 11:41 AM, Tuomas Tynkkynen wrote: > Some of the PHY parameters are not set according to the TRMs: > > - UTMIP_FS_PREABMLE_J should be set, not cleared > - UTMIP_XCVR_LSBIAS_SEL should be cleared, not set > - UTMIP_PD_CHRG should be set in host mode and cleared in device mode > - UTMIP_XCVR_SETUP is a two-part field; the upper bits were not set > diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c > #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) > +#define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x7f) >> 4) << 22) You may as well s/0x7f/0x70/ since the shift clears the 4 LSBs. I'm pretty sure I mentioned this in downstream review. Perhaps check my review comments to see if anything else was missed? -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html