In addition to providing the BCT configuration that is common for all Tegra20 Tamonten-derived boards, add scripts to build images that can be flashed to NAND for the Plutux, Medcom-Wide and TEC boards. Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx> --- Changes in v2: - move board directories to top-level, use common Tamonten files - keep BCT and image configurations in tamonten directory medcom-wide/build.sh | 27 +++++ plutux/build.sh | 27 +++++ ...onten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg | 132 +++++++++++++++++++++ tamonten/tegra20.img.cfg | 22 ++++ tec/build.sh | 27 +++++ 5 files changed, 235 insertions(+) create mode 100755 medcom-wide/build.sh create mode 100755 plutux/build.sh create mode 100644 tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg create mode 100644 tamonten/tegra20.img.cfg create mode 100755 tec/build.sh diff --git a/medcom-wide/build.sh b/medcom-wide/build.sh new file mode 100755 index 0000000..9fa70e5 --- /dev/null +++ b/medcom-wide/build.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# Copyright (C) 2013 Avionic Design GmbH +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +set -e +set -x + +cbootimage -t20 -gbct \ + ../tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg \ + Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct +cbootimage -t20 ../tamonten/tegra20.img.cfg tegra20-medcom-wide.img diff --git a/plutux/build.sh b/plutux/build.sh new file mode 100755 index 0000000..382e451 --- /dev/null +++ b/plutux/build.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# Copyright (C) 2013 Avionic Design GmbH +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +set -e +set -x + +cbootimage -t20 -gbct \ + ../tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg \ + Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct +cbootimage -t20 ../tamonten/tegra20.img.cfg tegra20-plutux.img diff --git a/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg b/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg new file mode 100644 index 0000000..16ff9af --- /dev/null +++ b/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg @@ -0,0 +1,132 @@ +# Copyright (C) 2011-2013 Avionic Design GmbH +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +Version = 0x00020001; +BlockSize = 0x00020000; +PageSize = 0x00000800; +PartitionSize = 0x01000000; +OdmData = 0x2b2d8011; + +DevType[0] = NvBootDevType_Nand; +DeviceParam[0].NandParams.ClockDivider = 0x00000004; +DeviceParam[0].NandParams.NandTiming2 = 0x0000000a; +DeviceParam[0].NandParams.NandTiming = 0x3b269213; +DeviceParam[0].NandParams.BlockSizeLog2 = 0x00000000; +DeviceParam[0].NandParams.PageSizeLog2 = 0x00000000; + +SDRAM[0].MemoryType = NvBootMemoryType_Ddr2; +SDRAM[0].PllMChargePumpSetupControl = 0x00000008; +SDRAM[0].PllMLoopFilterSetupControl = 0x00000000; +SDRAM[0].PllMInputDivider = 0x0000000c; +SDRAM[0].PllMFeedbackDivider = 0x0000029a; +SDRAM[0].PllMPostDivider = 0x00000000; +SDRAM[0].PllMStableTime = 0x0000012c; +SDRAM[0].EmcClockDivider = 0x00000001; +SDRAM[0].EmcAutoCalInterval = 0x00000000; +SDRAM[0].EmcAutoCalConfig = 0xe0a61111; +SDRAM[0].EmcAutoCalWait = 0x00000000; +SDRAM[0].EmcPinProgramWait = 0x00000000; +SDRAM[0].EmcRc = 0x00000014; +SDRAM[0].EmcRfc = 0x00000041; +SDRAM[0].EmcRas = 0x0000000f; +SDRAM[0].EmcRp = 0x00000005; +SDRAM[0].EmcR2w = 0x00000004; +SDRAM[0].EmcW2r = 0x00000005; +SDRAM[0].EmcR2p = 0x00000003; +SDRAM[0].EmcW2p = 0x0000000b; +SDRAM[0].EmcRrd = 0x00000004; +SDRAM[0].EmcRdRcd = 0x00000005; +SDRAM[0].EmcWrRcd = 0x00000005; +SDRAM[0].EmcRext = 0x00000001; +SDRAM[0].EmcWdv = 0x00000003; +SDRAM[0].EmcQUseExtra = 0x00000000; +SDRAM[0].EmcQUse = 0x00000004; +SDRAM[0].EmcQRst = 0x00000003; +SDRAM[0].EmcQSafe = 0x00000009; +SDRAM[0].EmcRdv = 0x0000000c; +SDRAM[0].EmcRefresh = 0x000004df; +SDRAM[0].EmcBurstRefreshNum = 0x00000000; +SDRAM[0].EmcPdEx2Wr = 0x00000003; +SDRAM[0].EmcPdEx2Rd = 0x00000003; +SDRAM[0].EmcPChg2Pden = 0x00000005; +SDRAM[0].EmcAct2Pden = 0x00000005; +SDRAM[0].EmcAr2Pden = 0x00000001; +SDRAM[0].EmcRw2Pden = 0x0000000e; +SDRAM[0].EmcTxsr = 0x000000c8; +SDRAM[0].EmcTcke = 0x00000003; +SDRAM[0].EmcTfaw = 0x0000000f; +SDRAM[0].EmcTrpab = 0x00000006; +SDRAM[0].EmcTClkStable = 0x0000000f; +SDRAM[0].EmcTClkStop = 0x00000002; +SDRAM[0].EmcTRefBw = 0x00000000; +SDRAM[0].EmcFbioCfg1 = 0x00000000; +SDRAM[0].EmcFbioDqsibDlyMsb = 0x00000000; +SDRAM[0].EmcFbioDqsibDly = 0x2f2f2f2f; +SDRAM[0].EmcFbioQuseDlyMsb = 0x00000000; +SDRAM[0].EmcFbioQuseDly = 0x2f2f2f2f; +SDRAM[0].EmcFbioCfg5 = 0x00000083; +SDRAM[0].EmcFbioCfg6 = 0x00000002; +SDRAM[0].EmcFbioSpare = 0x00000000; +SDRAM[0].EmcMrsResetDllWait = 0x00000000; +SDRAM[0].EmcMrsResetDll = 0x00000000; +SDRAM[0].EmcMrsDdr2DllReset = 0x00000100; +SDRAM[0].EmcMrs = 0x00000a5a; +SDRAM[0].EmcEmrsEmr2 = 0x00200000; +SDRAM[0].EmcEmrsEmr3 = 0x00300000; +SDRAM[0].EmcEmrsDdr2DllEnable = 0x00100000; +SDRAM[0].EmcEmrsDdr2OcdCalib = 0x00100382; +SDRAM[0].EmcEmrs = 0x00100002; +SDRAM[0].EmcMrw1 = 0x00000000; +SDRAM[0].EmcMrw2 = 0x00000000; +SDRAM[0].EmcMrw3 = 0x00000000; +SDRAM[0].EmcMrwResetCommand = 0x00000000; +SDRAM[0].EmcMrwResetNInitWait = 0x00000000; +SDRAM[0].EmcAdrCfg1 = 0x00070303; +SDRAM[0].EmcAdrCfg = 0x00070303; +SDRAM[0].McEmemCfg = 0x00080000; +SDRAM[0].McLowLatencyConfig = 0x80000003; +SDRAM[0].EmcCfg2 = 0x00000405; +SDRAM[0].EmcCfgDigDll = 0x00380006; +SDRAM[0].EmcCfgClktrim0 = 0x00000000; +SDRAM[0].EmcCfgClktrim1 = 0x00000000; +SDRAM[0].EmcCfgClktrim2 = 0x00000000; +SDRAM[0].EmcCfg = 0x0001ff00; +SDRAM[0].EmcDbg = 0x01000000; +SDRAM[0].AhbArbitrationXbarCtrl = 0x00010000; +SDRAM[0].EmcDllXformDqs = 0x00000010; +SDRAM[0].EmcDllXformQUse = 0x00000008; +SDRAM[0].WarmBootWait = 0x00000002; +SDRAM[0].EmcCttTermCtrl = 0x00000802; +SDRAM[0].EmcOdtWrite = 0x00000000; +SDRAM[0].EmcOdtRead = 0x00000000; +SDRAM[0].EmcZcalRefCnt = 0x00000000; +SDRAM[0].EmcZcalWaitCnt = 0x00000000; +SDRAM[0].EmcZcalMrwCmd = 0x00000000; +SDRAM[0].EmcMrwZqInitDev0 = 0x00000000; +SDRAM[0].EmcMrwZqInitDev1 = 0x00000000; +SDRAM[0].EmcMrwZqInitWait = 0x00000000; +SDRAM[0].EmcDdr2Wait = 0x00000002; +SDRAM[0].PmcDdrPwr = 0x00000001; +SDRAM[0].ApbMiscGpXm2CfgAPadCtrl = 0x77ffc000; +SDRAM[0].ApbMiscGpXm2CfgCPadCtrl2 = 0x08080079; +SDRAM[0].ApbMiscGpXm2CfgCPadCtrl = 0x77fffff0; +SDRAM[0].ApbMiscGpXm2CfgDPadCtrl2 = 0x44440009; +SDRAM[0].ApbMiscGpXm2CfgDPadCtrl = 0x77fffff0; +SDRAM[0].ApbMiscGpXm2ClkCfgPadCtrl = 0x77ffc000; +SDRAM[0].ApbMiscGpXm2CompPadCtrl = 0x01f1f008; +SDRAM[0].ApbMiscGpXm2VttGenPadCtrl = 0x07076600; diff --git a/tamonten/tegra20.img.cfg b/tamonten/tegra20.img.cfg new file mode 100644 index 0000000..f37614d --- /dev/null +++ b/tamonten/tegra20.img.cfg @@ -0,0 +1,22 @@ +# Copyright (C) 2013 Avionic Design GmbH +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +Version = 0x00020001; +Bctcopy = 1; +Bctfile = Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct; +BootLoader = u-boot.bin,0x00108000,0x00108000,Complete; diff --git a/tec/build.sh b/tec/build.sh new file mode 100755 index 0000000..2a49fdd --- /dev/null +++ b/tec/build.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# Copyright (C) 2013 Avionic Design GmbH +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +set -e +set -x + +cbootimage -t20 -gbct \ + ../tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct.cfg \ + Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct +cbootimage -t20 ../tamonten/tegra20.img.cfg tegra20-tec.img -- 1.8.2 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
