Am Dienstag, den 18.12.2012, 07:58 +0100 schrieb Thierry Reding:
> On Mon, Dec 17, 2012 at 06:58:23PM +0100, Lucas Stach wrote:
> [...]
> > +static int tegra20_plld_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct clk_tegra *c = to_clk_tegra(hw);
> > + unsigned long input_rate = parent_rate;
> > + u64 n = 0;
> > + int m_max, m_min, m = 0;
> > + u32 val, rem = 0;
> > + u8 cpcon = 0;
> > +
> > + m_max = input_rate / c->u.pll.cf_min;
> > + m_min = (input_rate / c->u.pll.cf_max) + 1;
> > +
> > + for (m = m_min; m <= m_max; m++) {
> > + n = (u64)rate * m;
> > + rem = do_div(n, input_rate);
> > + if (!rem)
> > + break;
> > + }
> > +
> > + if (rem)
> > + return -EINVAL;
>
> This code is common to both .round_rate() and .set_rate() so maybe you
> should factor it out.
>
Right.
> > +
> > + c->mul = n;
> > + c->div = n;
> > +
> > + val = clk_readl(c->reg + PLL_BASE);
> > + val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
> > + PLL_BASE_DIVM_MASK);
> > + val |= (m << PLL_BASE_DIVM_SHIFT) | (n << PLL_BASE_DIVN_SHIFT);
> > + clk_writel(val, c->reg + PLL_BASE);
> > +
> > + if (n <= 50)
> > + cpcon = 2;
> > + else if (n <= 300)
> > + cpcon = 4;
> > + else if (n <= 600)
> > + cpcon = 8;
> > + else if (n <= 1000)
> > + cpcon = 12;
> > +
> > + val = clk_readl(c->reg + PLL_MISC(c));
> > + val &= ~PLL_MISC_CPCON_MASK;
> > + val |= cpcon << PLL_MISC_CPCON_SHIFT;
> > + clk_writel(val, c->reg + PLL_MISC(c));
> > +
> > +
>
> There's a gratuitous blank line here.
>
> Other than that this algorithm looks pretty much like what I came up
> with in an earlier prototype. One difference is that I used an
> additional outer loop for the p-divider. Taking that into account should
> allow even more frequencies to be matched.
I don't think the outer loop is needed. The Coordinated Video Timings
(CVT) spec demands that pixelclocks are always aligned to 0.25MHz. As we
are running pll_d at four times the pixel clock we are always hitting a
plain integer value for the pll_d MHz.
Regards,
Lucas
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
