Hi,
On Wed, Dec 07, 2011 at 03:13:44PM -0700, Stephen Warren wrote:
> Seaboard and Ventana share some GPIOs, but others are different. Split the
> GPIO table into common, seaboard-specific, and ventana-specific tables, so
> that only the correct ones are enabled for each board. Add a few missing
> audio-related GPIOs for Ventana.
>
> Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
> ---
> arch/arm/mach-tegra/board-seaboard-pinmux.c | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
> index b1c2972..cb5b2e9 100644
> --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
> +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
> @@ -190,14 +190,26 @@ static struct tegra_gpio_table common_gpio_table[] = {
> { .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
> { .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
> { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
> + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
> +};
> +
> +static struct tegra_gpio_table seaboard_gpio_table[] = {
> { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
> { .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
> { .gpio = TEGRA_GPIO_HP_DET, .enable = true },
> { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
> - { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
> { .gpio = TEGRA_GPIO_USB1, .enable = true },
> };
>
> +static struct tegra_gpio_table ventana_gpio_table[] = {
> + /* hp_det */
> + { .gpio = TEGRA_GPIO_PW2, .enable = true },
> + /* int_mic_en */
> + { .gpio = TEGRA_GPIO_PX0, .enable = true },
> + /* ext_mic_en */
> + { .gpio = TEGRA_GPIO_PX1, .enable = true },
> +};
These should be given symbolical names instead.
-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
